Main content of this page

Anchor links to the different areas of information in this page:

You are here: News.

Business News

Business News

Corrosion protection of pipelines

( Source: Cortec Europe Advertising, Zagreb, Croatia )

[22/05/2013]

VpCI 637 TOL provides internal corrosion protection for gas flow and gas transmission lines. The product has superior effectiveness against water, corrosive gasses and chloride contamination. It is a combination of vapour phase, neutralizing and film-forming corrosion inhibitors to combat the broadest range of corrosive attack from moisture and condensation, oxygen, carbon dioxide, hydrogen sulfide and other corrosive contaminants in natural gas.

 Corrosion protection of pipelines - read more

World crude steel production increased by 1.2 % compared to April 2012

( Source: World Steel Association (worldsteel), Brussels, Belgium )

[22/05/2013]

World crude steel production for the 63 countries reporting to the World Steel Association (worldsteel) was 132 million t in April 2013, an increase of 1.2 % compared to April 2012.

China’s crude steel production for April 2013 was 65.7 million t, up by 6.8 % compared to April 2012. Elsewhere in Asia, Japan produced 9.2 million t of crude steel in April 2013, up by 1.0 % over April 2012. South Korea’s crude steel production was 5.5 million t in April 2013, down by -6.3% compared to the same month last year.

In the EU, Germany produced 3.7 million t of crude steel in April 2013, down by -0.9 % on April 2012. Italy’s crude steel production was 2.1 million t, a decrease of -11.6 % compared to April 2012. Spain produced 1.4 million t of crude steel, an increase of 10.3 % compared to April 2012. France’s crude steel production was 1.2 million t, down by -12.3 % on April 2012.

Turkey’s crude steel production for April 2013 was 2.9 million t, a decrease of -0.7 % compared to April 2012.

The US produced 7.3 million t of crude steel in April 2013, down by -7.3 % on April 2012.

In April 2013, Russia produced 5.6 million t of crude steel, a decrease of -4.3 % compared to the same month last year. Ukraine’s crude steel production for April 2013 was 2.7 million t, -8.4 % less than April 2012.

Brazil produced 3.0 million t of crude steel production in April 2013, a decrease of -1.6 % compared to the same month last year.

The crude steel capacity utilisation ratio for the 63 countries in April 2013 rose to 80.0 % from 79.1% in March 2013. Compared to April 2012, it is -2.0 percentage points lower.

 World crude steel production increased by 1.2 % compared to April 2012 - read more

WorldAutoSteel calls on Member States to support a Life Cycle Assessment in emissions legislation

( Source: World Steel Association, Brussels, Belgium )

[22/05/2013]

As negotiations on the EU review of the CO2 emissions from cars Regulation kick off today, the steel industry calls upon the Council to uphold Parliament’s amendment acknowledging the importance of a Life Cycle Assessment in emissions legislation after 2020.

On 24 April, in its vote on the review of CO2 emissions from cars legislation (443/2009), the European Parliament’s Environment Committee (ENVI) acknowledged the need to take into account “greenhouse gas emissions associated with energy supply and the life cycle of the vehicle" in regulations after 2020. WorldAutoSteel, the automotive group of the World Steel Association, welcomed this amendment and calls on Member States to support it during the negotiations between the European Parliament, Council and Commission (trialogue) set to begin today.

 WorldAutoSteel calls on Member States to support a Life Cycle Assessment in emissions legislation - read more

Another record year for stainless steel production

( Source: International Stainless Steel Forum (ISSF), Brussels, Belgium )

[21/05/2013]

The International Stainless Steel Forum (ISSF) has rele ased preliminary figures for 2012 which show that stainless steel production grew by 5.2 % to reach a record high of 35.4 million t. China accounted for the increase in production, with other regions of the world showing negative growth, mainly due to de-stocking.

 Another record year for stainless steel production - read more

Performing well in all conditions and temperatures

( Source: Rautaruukki Oyj, Helsinki, Finland )

[21/05/2013]

The Italian Fassi Gru S.p.A is recognized as one of the leader manufacturers of loader cranes in the world. The strong innovative feature of Fassi products is guaranteed by the use of advanced materials. To further increase their quality and performance, after a specific research project Fassi found new toughness requirement, which in their opinion was needed for the approval of material for crane building. Ruukki's high-strength Optim 700 MC Plus was the steel that best met the requirements, which is why Fassi is using it as their steel of choice.

 Performing well in all conditions and temperatures - read more

Repair of blast furnace in record time

( Source: ArcelorMittal, Luxembourg )

[17/05/2013]

ArcelorMittal Kryvyi Rih, the largest producer of rolled steel in Ukraine, has finished the overhaul of its blast furnace number seven after just 26 days. A total of 17 operations were performed on the blast furnace. "In April we accomplished a category two overhaul repair of blast furnace number seven. During this period, the furnace remained idle for four weeks (19 days of repairs and seven of commissioning operations). We were using only two blast furnaces in this period, but this did not affect our production performance in April", said Paramjit Kahlon, ArcelorMittal Kryvyi Rih chief operating officer. Kahlon added that cold repairs to the two-bath steelmaking vessel in the open-hearth plant and repairs to the return-stream apron conveyor number one in the sinter shop number one, also started in April.

 Repair of blast furnace in record time - read more

Gedämpfte Erwartungen zum Jahresbeginn

( Source: VDMA, Frankfurt )

[16/05/2013]

„2012 endete mit einer roten Null – die Auftragslage in der Thermoprozesstechnik-Branche hat sich im Jahresverlauf sukzessive eingetrübt, nachdem 2011 überdurchschnittlich viele Neuaufträge eingegangen waren. Das vorhandene Auftragspolster verhalf der Branche 2012 noch zu einer Umsatzsteigerung von durchschnittlich 6 %“, berichtete Dr. Timo Würz, Geschäftsführer des VDMA-Fachverbandes Thermoprozesstechnik am Mittwoch in Frankfurt. Der Auftragsrückgang machte sich bereits in der Jahresproduktion der Branche bemerkbar. Sie lag im abgelaufenen Jahr mit einem Wert von 1,7 Mrd. € unter der Zwei-Milliarden-Marke, die noch in den beiden Vorjahren überschritten worden war. Besonders betroffen war dabei der Bereich des elektrischen Industrieofenbaus.

 Gedämpfte Erwartungen zum Jahresbeginn - read more

Outokumpu conducts a strategic review of its VDM business

( Source: Outokumpu Oyj, Helsinki )

[16/05/2013]

Outokumpu has started a strategic review of its high performance alloys or VDM business unit. During this review, Outokumpu will evaluate strategic options for VDM and consider how best to drive continued growth and profitability for the business, within or outside of Outokumpu. Says Outokumpu CEO Mika Seitovirta: “Given the challenging economic and market environment, we want to investigate strategic options for the VDM business unit with the aim of improving our profitability and strengthening our balance sheet while ensuring the realization of at least € 200 million of synergy savings enabled by the Inoxum acquisition.”

 Outokumpu conducts a strategic review of its VDM business - read more

43 million Q1 2013 operating loss reported

( Source: ArcelorMittal, Luxembourg )

[13/05/2013]

ArcelorMittal announced results for its Flat Carbon Europe segment for the first quarter of 2013. The segment recorded an operating loss of €43 million for the first quarter of 2013 which excludes interest and tax costs. This is compared to an operating loss of €2,212 million in 4Q 2012 that had included a €1.9 billion write down of goodwill due to the weaker macro economic and market environments in Europe.

  • Compared to Q4 2012, the segment’s crude steel production increased 14.2% to 7.3 Mt in Q1 2013 due to a stock re-build following weak demand in the fourth quarter of 2012. Production in 1Q 2013 improved, benefiting from the restart of furnaces at Asturias and Dunkerque.
  • Steel shipments for Q1 2013 increased to 6.9 Mt, an increase of 15.7% as compared to 6.0 Mt for Q4 2012. Steel shipments increased in 1Q 2013 due to a pick up following the seasonally weaker period.
  • Sales were €5.2 billion for Q1 2013, 10.6% increase as compared to € 4.7 billion for Q4 2012. Sales benefited from higher steel shipment volumes offset in part by lower selling prices following weak iron ore pricing during Q4 2012.
  • Capital expenditure in the segment for the first quarter of 2013 was €157 million.
 43 million Q1 2013 operating loss reported - read more

 
 

More informations and functions