06/05/2015

Dalian Bailian Technology Co., Ltd.

WELE Gantry Machining Center Put Into Use

Gantry type machining center RB212 from WELE was installed and finished commissioning in April 2015.  WELE is OEM machine tool builder for JTEKT Japan, under TOYOTA.  With 90 degree milling head, it is able to make five axis machining of box type components in one clamp, with high accuracy and efficiency.    Bailian Technology hopes to enhance the capability of machining with this new machine.   Main machines in workshop are as follows. 


Machine                                   Specification    Units



  • RB212 Gantry Machining Center 1200mm Gantry x1 

  • B2016A Gantry Milling Machine 4.0×1.7×0.9m     x1

  • MYNX545 Machining Enter 1020×510×625mm     x1 

  • TA210 Gantry Shaper 6.0×1.7×1.4m                  x1

  • GV-780 CNC Vertical Lathe Ø850mm                   x2 

  • CW6110B Horizontal Lathe Ø1000mm                 x1 

  • CK5112 CNC Vertical Lathe Ø1250mm                 x1 

  • CW6180B Horizontal Lathe Ø800mm                   x2         

  • CX5225D Vertical Lathe 2500mm                        x1 

  • Radial Drilling Machine Z3080×25                        x1 

  • CQ5250 Vertical Lathe 5000mm                          x1 

  • Radial Drilling Machine Z3050×16/1                     x2 

  • CAK63135D CNC Horizontal Lathe Ø630mm         x1 

  • Knee-type Vertical Mill X5032                              x1 

  • TX6113D Boring Machine c/w DRO 2.0×2.0×1.8mx2 

  • TX6111C/2 Boring Machine c/w DRO 1.3×1.1×1.4m x1 

  • CMM 1.4×1×0.6m                                                 x1     

  • WAW-600D Hydraulic Universal Testing Machine 600KN x1