STOTEK A/S

Industriparken 9, 6500 Vojens
Denmark
Telephone +45 74540139
Fax +45 74540136
stotek@stotek.dk

Location

Hall map

GIFA 2015 hall map (Hall 11): stand D55

Fairground map

GIFA 2015 fairground map: Hall 11

Our range of products

Product categories

  • 02  Melting shop
  • 02.02  Electric melting and holding furnaces (pouring equipment see 10.01)
  • 02.02.04  Melting and holding furnaces, electric resistance type

Melting and holding furnaces, electric resistance type

  • 02  Melting shop
  • 02.02  Electric melting and holding furnaces (pouring equipment see 10.01)
  • 02.02.07  Bale-out furnaces, electric

Bale-out furnaces, electric

  • 02  Melting shop
  • 02.02  Electric melting and holding furnaces (pouring equipment see 10.01)
  • 02.02.09  Other electric melting and holding furnaces

Other electric melting and holding furnaces

  • 02  Melting shop
  • 02.03  Fuel-heated melting and holding furnaces
  • 02.03.01  Crucible melting and holding furnaces, fuel-heated

Crucible melting and holding furnaces, fuel-heated

  • 02  Melting shop
  • 02.03  Fuel-heated melting and holding furnaces
  • 02.03.02  Hearth-type melting and holding furnaces, fuel-heated

Hearth-type melting and holding furnaces, fuel-heated

  • 02  Melting shop
  • 02.03  Fuel-heated melting and holding furnaces
  • 02.03.05  Melting and holding furnaces, fuel heated

Melting and holding furnaces, fuel heated

  • 10  Casting machines and pouring equipment
  • 10.01  Pouring equipment
  • 10.01.02  Pouring equipment, dosing

Pouring equipment, dosing

  • 10  Casting machines and pouring equipment
  • 10.03  Peripheral equipment and auxiliary materials for die casting (die casting dies see 17.03.01)
  • 10.03.01  Ladling and dosing equipment for die-casting

Ladling and dosing equipment for die-casting

Our products

Product category: Melting and holding furnaces, electric resistance type

Holding Furnace

Støtek produces electric and gas fired holding furnaces. They can be static with tap cones and/or dip wells, or they can be tilting.

Regardless of which type, all Støtek holding furnaces are always built with a robust welded steel construction containing layers of high efficiency thermal insulation, refractory brick and non wetting line to ensure very low energy consumption and a high resistance to corundum build up.

Benefits:

  • Exact metal temperature
  • Simple cleaning
  • Robust construction
  • Reliable operation
  • Longer lifetime than corresponding furnaces
  • Energy-efficient - ensuring a minimum of 40% lower energy consumptions than other furnaces

 

More Less

Product category: Other electric melting and holding furnaces

Shaft Furnaces

Støtek offers shaft furnaces that can meet almost any need. Our smallest shaft furnace melts 350 kg aluminum per hour and holds 1500 kg, whereas our biggest model can melt as much as 3000 kg aluminum per hour and holds up to 20,000 kg. The shaft furnaces can either be static or tiltable - or you can even get a tilting model, where the shaft is static.
Also, it is possible to get a shaft furnace including our unique dosing system.

The shaft furnaces have a funnel shaped stack, into which a cold charge is poured via an automatic elevator. Heat from the burners rises up through the charge imparting most of its energy. The charge melts down onto a hearth, and then flows into the holding chamber.

The metal level in the tower and the holding chamber is sensed automatically, and the charge elevator can be set to automatic or manual operation.

On the larger furnaces the tower and the holding chamber are built as separate units, giving great flexibility in the available sizing and combinations.

Benefits:

  • Automatic feeding with elevator
  • Energy-efficient - ensuring a minimum of 40% lower energy consumptions than other furnaces
  • Exact metal temperature
  • Minimum metal loss due to our unique melting and holding system
  • Simple cleaning
  • Robust construction
  • Reliable operation
  • Longer lifetime than corresponding furnaces
  • Can be delivered with dosing system and degassing stone

More Less

Product category: Crucible melting and holding furnaces, fuel-heated

Crucible Melting Furnaces

Our popular aluminum melting crucible furnaces can be used for aluminum as well as for magnesium and zinc.

The furnaces are constructed of a rolled steel shell and layers of high efficiency thermal insulation. The Støtek block heating elements are designed in such a way that they can be replaced from above without having to remove the crucible. The design and quality of the elements combined with a low running temperature ensure an exceptionally long service life.

An available metal leakage detector will give an alarm if any metal pools in the bottom of the furnace.

Støtek aluminum melters are available in different models: a static model (Alumelter), a tiltable model (Alumelter K), and the Alumelter-Doso, which is an aluminum melting crucible furnace with a Støtek dosing pump installed.

Benefits:

  • Exact metal temperature
  • Minimal interruptions during replacements
  • Easily readable instruments
  • Robust construction
  • Reliable operation
  • Longer lifetime than corresponding furnaces
  • Energy-efficient - ensuring a minimum of 40 % lower energy consumptions than other furnaces

 

More Less

Product category: Ladling and dosing equipment for die-casting

Dosing furnaces

The Støtek dosing furnace is one of several products that differentiate us - making Støtek the preferred supplier to aluminum foundries worldwide.

Traditional dosing furnaces have been pressure pour furnaces, but in 1999, Støtek developed Dosotherm - a new generation of aluminum furnaces. The Dosotherm dosing pump is a much smaller pressure vessel. It is filled with a vacuum to ensure that the starting level is always constant - allowing an accurate dose of the metal dispensed.

Thanks to this unique technique, you also obtain remarkably low energy consumption, as well as high metal quality.

Dosotherm is often used for high-pressure die-casting, for gravity, sand, and mold casting. It allows you to change the dosing flow while the system is running.

The holding chamber of our dosing furnaces are fully enclosed with no gas exchange. Consequently, thermal efficiency is very high, which results in very low oxide formation.

Benefits of the Støtek dosing system:

  • Dosing accuracy of +/- 1%
  • Energy-efficient - ensuring a minimum of 40% lower energy consumptions than other furnaces
  • Typical temperature accuracy of +/-1 degree C
  • Greatly reduced oxidation giving higher metal quality
  • Faster dosing cycle times
  • Filling level at about the same level as the short sleeve
  • Filling level below the cleaning door

More Less

About us

Company details

STOTEK Danmark ApS is a consolidated and expansive danish company, that manufactures melting, holding and dosing -

furnaces for aluminium.

STOTEK's furnace production and store facilities are located in Vojens Denmark, centrally located for fast delivery to the whole of Europe.

STOTEK are represented with sales departments in Sweden and The U.S. STOTEK has produced and sold furnaces to following countries: Argentine, Brazil, Denmark, England, Finland, Holland, Italy, Jordan, Kazakhstan, Norway, Sweden, Switzerland, Spain, The Czech Republic, Germany, Hungary and The U.S.

STOTEK also sell foundry necessities to iron, steel and non-ferrous foundries in Scandinavia and Germany.

STOTEK furnaces - from professionals for professionals!

More Less