COPROMEC DIE CASTING S.R.L.

Via Missana, 31, 25077 Roè Volciano (BS)
Italy
Telephone +39 0365 63776
Fax +39 0365 556877
info@copromec.it

Location

Hall map

GIFA 2015 hall map (Hall 11): stand C74

Fairground map

GIFA 2015 fairground map: Hall 11

Contact

LUCIO ZAMBELLI

Executive board/managing director
Marketing, sales, advertising, PR

Italy

Email
info@copromec.it

Visit us

Hall 11 / C74

16.06.2015

Topic

Download

12:00

Italian Food specialities, appetizers and vine

More Less

17.06.2015

Topic

Download

12:00

Italian Food specialities, appetizers and vine

More Less

18.06.2015

Topic

Download

12:00

Italian Food specialities, appetizers and vine

More Less

19.06.2015

Topic

Download

12:00

Italian Food specialities, appetizers and vine

More Less

20.06.2015

Topic

Download

12:00

Italian Food specialities, appetizers and vine

More Less

Our range of products

Product categories

  • 10  Casting machines and pouring equipment
  • 10.03  Peripheral equipment and auxiliary materials for die casting (die casting dies see 17.03.01)
  • 10.03.09  Other accessories for die-casting

Other accessories for die-casting

Our products

Product category: Other accessories for die-casting

Lubricated Shot End System

The plunger tip is made of a special steel to be efficient with the casting process with a wide temperature range and heavy working conditions. It contains two rings made of a special pressed copper alloy. The copper rings are always in contact with the shot sleeve and they work as a seal for the liquid aluminium as in a hydraulic system. Between the plunger tip head and the first ring, there are some slots to permit the aluminium to enter under the ring. The first ring contains the liquid aluminium and uses its power to be in constant contact with the sleeve perimeter. At each injection it enlarges and stops the solidified aluminium below to guarantee the best contact with the shot sleeve. The support pin is made of a high quality hardened steel and it is assembled behind the plunger tip by a thread. The thread is blocked by the contact with the plunger tip head and the support pin head. The support pin cooling system works utilizing a cooling-hole circuit

More Less

About us

Company details

COPROMEC Innovative Plunger tip System. PATENTED

1. Steel plunger tip with copper rings(standard model)
2. Special shaped plunger tip for three plate dies, in order to always assure biscuit release
3. Plunger tip with lubrication circuit under the rings
4. Plunger tip for strong vacuum system
5. "Save metal" plunger tip, that allows to reduce the weight of the biscuit, assuring same performance
6. Plunger tip with copper insert in the head, to remarkably increase biscuit cooling

The copper ring is replaced after use in 5 minutes easily, most of the time is possible to operate in board

COPROMEC FINALLY SOLVED THE PROBLEM OF LUBRICATION OF WHOLE SHOT SLEEVE. PATENTED

Copromec developed the Integrated Lubricated Plunger Rod, innovative system.

COPROMEC supplies the whole system and all the accessories, from the lubricant to the control unit. The lubricant is distributed directly inside the shot sleeve during injection cycle. As requested from Production methods, is possible to apply a controlled quantity of lubricant, the timing can be programmed by the machine operator simply.

 

More Less

Company data

Sales volume

1-9 Mio US $

Export content

> 75%

Number of employees

20-49

Foundation

1999