Molten Metal Products Ltd.

Unit 7 Crucible Business Park, Woodbury Lane, WR5 2BA Norton, Worcester
United Kingdom of Great Britain and Northern Ireland
Telephone +44 1905 728200
Fax +44 1905 767877
sales@moltenmetalproducts.com

Location

Hall map

GIFA 2015 hall map (Hall 11): stand C62

Fairground map

GIFA 2015 fairground map: Hall 11

Contact

Dave Hill

Executive board/managing director
Business, corporate or plant management

Unit 7 Crucible Business Park
WR5 2BA Norton, Worcester, United Kingdom of Great Britain and Northern Ireland

Phone
+44 1905 728-205

Fax
+44 1905 767-877

Email
dave.hill@moltenmetalproducts.com

Our range of products

Product categories

  • 02  Melting shop
  • 02.03  Fuel-heated melting and holding furnaces
  • 02.03.01  Crucible melting and holding furnaces, fuel-heated

Our products

Product category: Crucible melting and holding furnaces, fuel-heated

MORGAN MKV GAS/OIL LIFT OUT FURNACE

FURNACE DESCRIPTION

The Morgan lift out furnace can melt a wide range of metals and alloys up to iron temperatures, using AX or CX type crucibles inserted and taken out with tongs.

The steel furnace casing is lined with 63% alumina brick backed by high grade insulation. The swing aside cover of the furnace has a central exhaust which deflects the exhaust gasses over the top of the crucible to pre-heat the solid charge. The furnace is equipped with a drain hole assembly which will allow metal entering the furnace chamber to escape to a suitable catchment pit.

MODE OF OPERATION

For the two smaller furnaces, LO1 and LO2, the crucible is drawn by using ‘T’ shaped tongs. For the larger furnaces, a hoist or crane with either straight reined or chain tongs is necessary.

More Less

Product category: Crucible melting and holding furnaces, fuel-heated

MORGAN MKV recuperative tilting FURNACE

The MK V Gas Fired Lip Axis Pouring Recuperative Basin Tilting Furnace suitable for temperatures up to 850ºc, provides the maximum economy in energy costs so far, through the use of radiant panel technology, efficient low thermal mass materials in the lining and recuperation.

By recycling part of the waste energy from the exhaust products, typically 35% can be saved and can be as high as 50% over some conventional, side exhaust brick lined furnaces.

Radiation losses from the metal are minimised by the use of a well insulated  swing aside cover that can cover the crucible when no charging is required.

The radiant panels and lining give excellent melting performance from the compact high efficiency burner. The burner also facilitates improved internal heat circulation and transfer through convection, producing a more even heat distribution around the crucible enhancing crucible life.

The insulation materials used in the furnace lining result in low casing temperatures, provide comfortable and safe working conditions.

Working conditions are also optimised by very low noise emissions, as the exhaust recuperator also acts as an effective silencer.

In addition to reduced carbon dioxide emissions through lowered heat input the advanced burner technology also minimises Nitrous Oxides and Carbon monoxide, important to health and the environment.

More Less

Product category: Crucible melting and holding furnaces, fuel-heated

MMP Central Axis Furnace Gas-Oil

FURNACE DESCRIPTION

The Morgan Central Axis Furnace can melt a wide range of metals and alloys up to iron temperatures, using TPX pour over the top crucibles.

The steel furnace casing is lined with 63% alumina brick, backed by high grade insulation. The cover of the furnace has exhaust ports around the crucible which gives further heating to the top of the crucible providing some pre heat to the solid charge. The furnace is equipped with a drain hole assembly which will allow metal entering the furnace chamber to escape to a suitable catchment pit.

MODE OF OPERATION

Charge materials are loaded into the crucible and melting commenced. The brim full capacity of the crucible is significantly higher than the working liquid metal capacity, allowing near full charges to be loaded. However, additions may be required during the melting time. When ready the contents are discharged by hand-wheel tilting at the central axis, pouring over the crucible top.

SIZE RANGE

C A furnaces are available in four standard sizes to give capacities from 22kg - 95kg aluminium ,70kg - 300kg bronze.

INSTALLATION

The furnace is supplied complete with stand-alone control panel , fan and interconnecting cable harness. It requires only to be connected to the electrical and fuel services. In all cases provision should be made for a spilt metal pit.

FURNACE VERSIONS

Central Axis Furnaces are available for operation with gas or fuel oil in two versions:

1) For metal temperatures up to 1250ºc using gas or oil.

2) For temperatures up to 1400ºc using oil only.

 

More Less

About us

Company details

Exclusive Licenced Manufacturers of Morgan Furnaces & Spares

More Less

Company data

Export content

> 75%

Number of employees

1-19

Foundation

2010