Stangl Technik GmbH

Haselbachstr. 16, 4873 Frankenburg
Telephone +43 7672 94956-0
Fax +43 7672 94956-29


Hall map

METEC 2015 hall map (Hall 4): stand C27

Fairground map

METEC 2015 fairground map: Hall 4

Our range of products

Product categories

  • 03  Plant and equipment for steel making
  • 03.05  Components, ancillary equipment

Components, ancillary equipment

  • 05  Plant and equipment for casting and pouring of molten steel
  • 05.02  Continuous casting

Continuous casting

  • 07  Plant and equipment for shaping of steel
  • 07.21  Components, ancillary equipment

Components, ancillary equipment

  • 14  Steel mills

Steel mills

Our products

Product category: Continuous casting

Slab And Billet Deburrer STDH

The Deburrer STDH removes burr on billets and slabs that result from torch cutting at rate of 98%. Slab speed can be up to 0.5 m/sec.

Working Principle Of The Deburrer

A heavy, rotating, shaft that holds an arrangement of impact hammers runs over the whole width of the roller table. This "hammer mill" is driven via a cardan shaft that connects it with the motor. That shaft can be lifted via hydraulic cylinders at both ends in order to be aligned to the slab position.

▶Inquire Now

Burr Removal Procedure

After the approaching hot slab is detected on the roller table, the slab enters into the deburrer at full roller table speed.At this stage the hammer mill is rotating in the lifted position in order to mill off the burr on the front edge of the slab. After this working step the shaft stops its rotation and goes down under the moving slab.When the rear end of the slab approaches, the operation starts again, but it rotates in the opposite direction and is lifted in order to mill off the burr on the tail edge.Finally the burr remover is lowered into waiting position and the rotation stops.A new working cycle starts upon the detection of the next slab.

More Less

Product category: Components, ancillary equipment

Stamping Machine STSD

The alphanumeric Stamping Machines STSD are designed for the stamping of product identification codes into hot billets, blooms or slabs.


- Highest durability of marking
- High stamping force
- Very fast

Stamping Speed: 5 Characters per Second

in fully automated mode.

Robust Automatic Surface Detection / Empty Space Detection

The stamping head will detect the position of the stamping surface autonomously.

High Legibility of Markings

Symbol sizes 3 mm to 40 mmMultiple lines of text are possiblePenetration depth from 0.1 mm to 2 mm


More Less

About us

Company details

STANGL TECHNIK has acquired a reputation as designer and manufacturer of tailor made facilities for continuous casters. During the years some machines became a standard, other machines still change from customer to customer.

If you have an application and need a special solution for your problem please do not hasitate to contact us.

STANGL TECHNIK relies on the technical expertise of Mr. Kurt Stangl who since 1982 is well known as the inventor of numerous innovations in the field of marking technology. Kurt Stangl is the inventor of the Digital Stamping technology. He has also developed continuous stamping with changeable characters especially for railway rails.

Based on this experience, our products are constantly being improved.

More Less

Company data

Sales volume

1-9 Mio US $

Export content

> 75%

Number of employees