Mec Ind. Srl

Via Roveda, 4/D, 41011 Campogalliano (Mo)
Italy
Telephone +39 059 525253
Fax +39 059 525303
info@mec-ind.com

Location

Hall map

GIFA 2015 hall map (Hall 15): stand C12

Fairground map

GIFA 2015 fairground map: Hall 15

Our range of products

Product categories

  • 05  Moulding and core making
  • 05.03  Core making machines and plants
  • 05.03.01  Core blowing and shooting machines and plants

Core blowing and shooting machines and plants

Our products

Product category: Core blowing and shooting machines and plants

MI SAR 1AC

Automatic core blowing machine with vertical split of the core box, including moulding station, based on the Shell-Moulding process.
The mobile unit that holds the core box and the reservoir attached to the rods rotates 180° to spray at any point between the bottom and the top and to return to the bottom, tilting +/- 45° to make it easier to empty the cores, if required.
The machine is equipped with a direct flat spray reservoir and blowing head cooling system. The pneumatically-powered automatic loading system also includes a loading hopper.
The mobile support, attached to the half-box containing the core, is equipped with a device to overturn it onto the belt using cylinder-driven extractors. Heating is generated by an independent burner frame for each half-box, fed by an air and gas mix (LPG or NATURAL GAS) with heat regulation.
The machine is equipped with a 24V control panel for manual or automatic operation in a single or continuous cycle in addition to a hydraulic control unit to operate the overturning cylinders and motor.
From the protective booth the operator can access the machine while maintaining the safety level established by CE regulations.

OPTIONAL FEATURES:
- Belt with top-bottom vertical movement;
- Blower and detaching spray.

More Less

Product category: Core blowing and shooting machines and plants

MI SAV 1A

Automatic core blowing machine with top-to-bottom thrust and horizontal split of the core box, including moulding station, based on the Shell-Moulding process.
The machine is equipped with a direct flat spray reservoir and blowing head cooling system. The pneumatically-powered automatic loading system also includes a loading hopper.
The mobile support, attached to the half-box containing the core, is equipped with a device to overturn it onto the belt using cylinder-driven extractors. Heating is generated by an independent burner frame for each half-box, fed by an air and gas mix (LPG or NATURAL GAS) with heat regulation.

The machine is equipped with a 24V control panel for manual or automatic operation in a single or continuous cycle. From the protective booth the operator can access the machine while maintaining the safety level established by CE regulations.

OPTIONAL FEATURES:
- Blower and detaching spray.

More Less

Product category: Core blowing and shooting machines and plants

MI SA 1AC

Automatic core blowing machine with top-to-bottom thrust and vertical split of the core box, including moulding station, based on the Shell-Moulding process.
The machine is equipped with a direct flat spray reservoir and blowing head cooling system. The pneumatically-powered automatic loading system also includes a loading hopper.
The mobile support, attached to the half-box containing the core, is equipped with a device to overturn it onto the belt using cylinder-driven extractors.
Heating is generated by an independent burner frame for each half-box, fed by an air and gas mix (LPG or NATURAL GAS) with heat regulation.
The machine is equipped with a 24V control panel for manual or automatic operation in a single or continuous cycle.
From the protective booth the operator can access the machine while maintaining the safety level established by CE regulations.

OPTIONAL FEATURES:
- Belt with top-bottom vertical movement;
- Blower and detaching spray;
- core box third part (contrast).

More Less

About us

Company details

The mechanical activities of the company "F.lli BORGHI", run by the brothers Gino, Mario, Giuseppe and Leo, began in Mario's cellar back in 1957.
After a period in which operations focused mainly on general mechanical construction, the company began to specialise in manufacturing foundry machines.
In 1980 began a new period of technological development that focused on core and shell making machines.
The company participated in prestigious Italian trade shows in Parma (1997 and 2000) and in Brescia (2002-2004-2006-2008-2010). The company made its first appearance at GIFA in 2003, the sector's most important international trade show which is held every 4 years in Düsseldorf and exhibited also in 2007 at GIFA to celebrate its 50th anniversary.
We are waiting for you to our Booth in the next GIFA 2011!

More Less