Counter Pressure Casting Inc.

25732 Commercentre Drive, 92630 Lake Forest, CA
United States of America

Telephone +1 949 830-7797, +1 949 235-1011
Fax +1 949 830-0404
vincent.khristov@cpcmachines.com

Location

Hall map

GIFA 2015 hall map (Hall 11): stand D60

Fairground map

GIFA 2015 fairground map: Hall 11

Contact

Vincent Khristov

Executive board/managing director
Business, corporate or plant management

25732 Commercentre Drive
92630 Lake Forest, CA, United States of America

Phone
+1-949-235-1011

Email
vincent.khristov@cpcmachines.com

Victor Khristov

Executive board/managing director
Business, corporate or plant management

25732 Commercentre Drive
92630 Lake Forest, CA, United States of America

Phone
+359-898-475-069

Email
victor.khristov@cpcmachines.com

Our range of products

Product categories

  • 02  Melting shop
  • 02.02  Electric melting and holding furnaces (pouring equipment see 10.01)
  • 02.02.04  Melting and holding furnaces, electric resistance type

Melting and holding furnaces, electric resistance type

  • 03  Refractories technology
  • 03.01  Refractory materials and products, insulating materials
  • 03.01.03  Refractory gating system parts

Refractory gating system parts

  • 03  Refractories technology
  • 03.01  Refractory materials and products, insulating materials
  • 03.01.04  Insulating materials and products

Insulating materials and products

  • 10  Casting machines and pouring equipment
  • 10.04  Diecasting machines and accessories
  • 10.04.01  Gravity diecasting machines/plants

Gravity diecasting machines/plants

  • 10  Casting machines and pouring equipment
  • 10.04  Diecasting machines and accessories
  • 10.04.02  Low pressure diecasting machines/plants

Low pressure diecasting machines/plants

  • 17  Pattern and die making
  • 17.03  Pattern equipment, permanent moulds and accessories
  • 17.03.02  Permanent moulds, gravity dies

Permanent moulds, gravity dies

Our products

Product category: Melting and holding furnaces, electric resistance type

Holding Furnaces

CPC

Electrical Resistance Crucible Type Holding Furnaces

500Kg

750Kg

900Kg

 

More Less

Product category: Refractory gating system parts

CPC-Ceramics

CPC Ceramics-

The CPC Group’s Ceramics division has been developing Aluminum Titanate (AlTi) products for the foundry industry for over 20 years, including many used in our counter and low pressure casting machines. We can meet the needs of the most demanding customers by offering quality, selection and value for their investment.

  • Alti Riser Tubes
  • Dosing Tubes
  • Bushings
  • Thermocouple Protection Tubes
  • Crucibles

More Less

Product category: Low pressure diecasting machines/plants

CPC 1300

Counter Pressure Casting (CPC) machines have been developed to utilize the counter pressure casting process. With more than 40 years of experience using counter pressure, we are able to exceed our customers’ requirements for efficient production of aluminum castings in permanent, sand or combined molds. Our equipment produces castings that exceed the highest requirements for mechanical properties, structural strength density, surface smoothness and dimensional accuracy. Each machine is designed to control all parameters of the CPC process while providing simple and reliable operation with minimum maintenance. With the ability to operate in counter pressure or low pressure mode, the CPC 1303 is the most versatile machine available on the market.

 

MACHINE CONSTRUCTION

The 1300 series is designed on a simple and reliable concept. The rugged, vertical four hard chrome plated steel tie bars are attached to four main platens. The top and bottom plates are fixed with movable and intermediate platens guided by the tie bars installed between them. These two plates control the main movements and operations of the machine.

More Less

Product category: Low pressure diecasting machines/plants

Counter Presssure Casting 1600 Machine

CPC 1600 C96

CPC developed the 1600 C96 casting machine for the ultimate in high strength chassis parts production. With the ability to use 6 cavity molds, minimal cycle times, and our revolutionary counter pressure technology, this is the most advanced combination of technology and equipment on the market today. It is the largest machine ever built by CPC and has surpassed the expectations of today’s OEM manufacturers. The CPC 1600 C96 is unmatched in the industry and provides our customers with production advantages on multiple levels they won’t find anywhere else.

The CPC 1600 has higher productivity then any other chassis casting equipment on the market today. With its 96 air/water cooling lines, you can cast up to 10 castings per cycle. The larger platen provides a broad range of capabilities including fitting up to six dies in the die chamber with the ability to cast multiple cavities per die at one time. There is even the ability to change the flanges allowing for different numbers and configurations of riser tubes giving you maximum flexibility.

More Less

Product category: Permanent moulds, gravity dies

CPC Mold Design & Production

CPC's mold division is a one-stop shop for design, engineering, testing and development of counter pressure technology. A market specialist in mold manufacturing, Ilinden delivers the highest quality molds for CPC machines as well as high and low pressure dies and tooling.

More Less

About us

Company details

With 25 years of research and development C. P. C. Group is recognized as the world leader in Counter-PressureCasting technology. The advantages over other casting methods have revolutionized the casting industry.

Products:


  • Counter Pressure Casting Machines
  • Low Pressure Casting Machines
  • Gravity-Die Casting Machines
  • Aluminum Metal Transfer Systems
  • Holding Furnaces
  • Shuttle Transfer Systems
  • Permenant Molds & Dies
  • AlTi Riser Tubes, Bushings, And supplies

 

 

In a business where reliability and efficiency are paramount, the CPC Group is proud to have more than 100 years combined experience in the manufacturing of over 1,000 state-of-the-art casting machines. We provide our customers with the expertise of 500 highly skilled engineers, technicians and machinists who create, build and maintain the best in mass production technology and machinery operating around the world.

As automotive manufacturers look for ways to reduce chassis weight and increase strength, aluminum has become a major element in chassis component production. Counter pressure casting (CPC) is the latest aluminum casting technology used in the development of chassis components. For the past decade, the CPC Group has been tailoring this technology to meet the high demands of the safety-critical chassis components market.

CPC exceeds all of our customers’ expectations and has set a new standard for requirements in the chassis industry. We combine this revolutionary technology with unmatched efficiency to provide a solution that produces the highest quality parts in the most cost-effective way. There is no other process available today that is better suited for the production of these safety critical components. Counter pressure technology is being used by nearly every major automobile manufacturer in the world for chassis components and those that aren’t soon will be.

Because of the many advantages CPC technology provides, it is also the number one choice for any aluminum castings where high strength, reliability and cost are factors. We have many customers in the automotive, motorcycle, marine and electrical industries who lead the world in production and require the superior quality products only CPC can supply.

 A worldwide presence, years of experience and a forward-thinking mentality all contribute to the CPC Group’s ability to produce new innovations year after year in the manufacturing of superior casting equipment. CPC equipment produces aluminum castings for the automotive, motorcycle, recreational vehicle and electrical industries around the world.

 

 

 

 

More Less

Company data

Sales volume

10-49 Mio US $

Export content

> 75%

Number of employees

100-499

Foundation

1996