Agromatic Regelungstechnik GmbH

Stukenbrocker Weg 38, 33813 Oerlinghausen
Germany
Telephone +49 5202 9739284
Fax +49 5202 973925
sales@agromatic.de

Location

Hall map

THERMPROCESS 2015 hall map (Hall 9): stand C41

Fairground map

THERMPROCESS 2015 fairground map: Hall 9

Contact

Dr. Christian Lutz

Vorstand/Geschäftsführer
Geschäfts- /Unternehmensleitung

Stukenbrocker Weg 38
33813 Oerlinghausen, Germany

Phone
+49 5202 9739-0

Fax
+49 5202 9739-25

Email
Lutz@agromatic.de

Ralf Sewing

Hauptabteilungsleiter
Marketing, Vertrieb, Werbung, PR

Stukenbrocker Weg 38
33813 Oerlinghausen, Germany

Phone
+49 5202 9739-0

Fax
+49 5202 9739-25

Email
Sewing@agromatic.de

Wolfgang Kreuzbusch

Abteilungs-/Gruppenleiter
Marketing, Vertrieb, Werbung, PR

Stukenbrocker Weg 38
33813 Oerlinghausen, Germany

Phone
+49 5202 9739-15

Fax
+49 5202 9739-25

Email
Kreuzbusch@agromatic.de

Our range of products

Product categories

  • 03  Componentes, equipment and other supplies
  • 03.01  Fittings for
  • 03.01.01  Gas

Gas

  • 03  Componentes, equipment and other supplies
  • 03.01  Fittings for
  • 03.01.02  Liquids

Liquids

  • 03  Componentes, equipment and other supplies
  • 03.01  Fittings for
  • 03.01.03  Solid

Solid

  • 03  Componentes, equipment and other supplies
  • 03.07  Controlling and automatisation
  • 03.07.04  Automatisation

Automatisation

Our products

Product category: Electrical equipment

N5 - N6 Rotary and part-turn actuators

To increase the torque of N5 and N6 series solutions an additional gearbox is added to N1 to N4 series actuators. This increases the available torque range to between 80 Nm and 180 Nm.
The numerous options and actuators based on the same electrical design common to rotary and part-turn actuator series N1 to N4 A ensure the N series is the optimum solution for applications in process plant engineering.

  • Wide torque range
  • Wide range of positioning times
  • Constant positioning times under fluctuating loads
  • Large number of position switches possible
  • Electronic position controller ESR-N integrated in actuator
  • Wide selection of output shafts
  • Custom shafts possible
  • Solid metal housing
  • Maintenance-free gearbox
  • Operates in any position

 

More Less

Product category: Electrical equipment

Industrial valves

Our range of fittings include ring butterfly valves, flanges and high temperature butterfly valves, butterfly valves, ball valves and control valves. We are always open for special requirements or customer-specific requirement.

More Less

Product category: Electrical equipment

N1 - N4 Rotary and part-turn actuators

  • Wide torque range – 1 Nm – 60 Nm
  • Wide range of positioning times
  • Constant positioning times under fluctuating loads
  • Large number of auxiliary position switches possible
  • Electronic position controller ESR-N integrated in actuator
  • Wide selection of output shafts
  • Custom shafts possible
  • Solid metal housing
  • Maintenance-free gearbox
  • Operates in any position

 

More Less

Product category: Electrical equipment

KA Linear actuator

KA series linear actuators are utilized to precisely adjust dampers in air-conditioning, ventilation and heating systems as well as in furnaceinstallations, process plant engineering and other fields of industry.

  • Wide range of force outputs
  • Large stroke range
  • Wide range of positioning times
  • Constant positioning times under fluctuating loads
  • Large number of auxiliary position switches possible
  • Solid metal housing
  • Maintenance-free gearbox
  • Operates in any position
  • Protected spindle

 

More Less

Product category: Electrical equipment

K Linear actuator

K series linear actuators are utilized to precisely adjust dampers in air-conditioning, ventilation and heating systems as well as in furnace installations, process plant engineering and other fields of industry.
They are available with the following actuating forces: 600 N, 1200 N, 1800 N, 2500 N, 3000 N, 3500 N and 5000 N. The stroke units are designed for stroke lengths of 150-750 mm. The technical construction mirrors that of series N actuators. End position limit stop is path dependent.

  • Wide range of force outputs
  • Large stroke range
  • Wide range of positioning times
  • Constant positioning times under fluctuating loads
  • Two additional force-sensitive switches possible
  • Solid metal housing
  • Maintenance-free gearbox
  • Operates in any position

 

More Less

Product category: Electrical equipment

ATEX NEx Rotary, part-turn and linear actuators

More Less

Product category: Electrical equipment

DR/SC Pneumatic part-turn actuator

DR/ SC 10, SC 15, SC 30, SC 60, SC 100, SC 150, SC 220, SC 300, SC 450, DR/ SC 600, SC 900, SC 1200, SC 2000, SC 3000, SC 4000, SC 5000, SC 10000

 

  • Complies with requirements for use in safety-related systems to EN 61508
  • Designed for use in zone 2 and zone 22
  • Wide torque range
  • Solid, corrosion-resistant housing made of aluminum
  • Maintenance-free
  • Operates in any position

 

More Less

Product category: Other control equipment

Industrial valves

Our range of fittings include ring butterfly valves, flanges and high temperature butterfly valves, butterfly valves, ball valves and control valves. We are always open for special requirements or customer-specific requirements .

More Less

Product category: Other control equipment

K Linear actuator

230 V AC, 115 V AC, 24 V AC, 400 V DS, 24 V DC
(further electrical currents on request)

(former type: WAK)

K series linear actuators are utilized to precisely adjust dampers in air-conditioning, ventilation and heating systems as well as in furnace installations, process plant engineering and other fields of industry.

They are available with the following actuating forces: 600 N, 1200 N, 1800 N, 2500 N, 3000 N, 3500 N and 5000 N. The stroke units are designed for stroke lengths of 150-750 mm. The technical construction mirrors that of series N actuators. End position limit stop is path dependent.

The standard scope of supply includes a limit switch for each end position. These are designed as changeover switches and can also perform supplementary functions such as end position indication or sequential control tasks.

  • Wide range of force outputs
  • Large stroke range
  • Wide range of positioning times
  • Constant positioning times under fluctuating loads
  • Two additional force-sensitive switches possible
  • Solid metal housing
  • Maintenance-free gearbox
  • Operates in any position

More Less

Product category: Other control equipment

KA Linear actuator

230 V AC, 115 V AC, 24 V AC, 400 V DS, 24 V DC
(further electrical currents on request)

(former types: WAK-A)

KA series linear actuators are utilized to precisely adjust dampers in air-conditioning, ventilation and heating systems as well as in furnaceinstallations, process plant engineering and other fields of industry.

They are available with the following actuating forces: 600 N, 1200 N, 1800 N, 2500 N, 3000 N, 3500 N and 5000 N. The stroke units are designed for stroke lengths of 150-1100 mm. The technical construction mirrors that of series N actuators. End position limit stop is path dependent. The standard scope of supply includes a limit switch for each end position.

  • Wide range of force outputs
  • Large stroke range
  • Wide range of positioning times
  • Constant positioning times under fluctuating loads
  • Large number of auxiliary position switches possible
  • Solid metal housing
  • Maintenance-free gearbox
  • Operates in any position
  • Protected spindle

More Less

Product category: Other control equipment

N5 – N6 Rotary and part-turn actuator

230 V AC, 115 V AC, 24 V AC, 400 V DS, 24 V DC (further electrical currents on request)

N5, N5 A, N6
(former types: WAN 5, WAN 5 A, WAN 6)

To increase the torque of N5 and N6 series solutions an additional gearbox is added to N1 to N4 series actuators. This increases the available torque range to between 80 Nm and 180 Nm.

The numerous options and actuators based on the same electrical design common to rotary and part-turn actuator series N1 to N4 A ensure the N series is the optimum solution for applications in process plant engineering. The actuator is compatible or closed loop operations. The actuator is compatible or closed loop operations.

  • Wide torque range
  • Wide range of positioning times
  • Constant positioning times under fluctuating loads
  • Large number of position switches possible
  • Electronic position controller ESR-N integrated in actuator
  • Wide selection of output shafts
  • Custom shafts possible
  • Solid metal housing
  • Maintenance-free gearbox
  • Operates in any position

More Less

Product category: Other control equipment

N1 – N4 A Rotary and part-turn actuator

230 V AC, 115 V AC, 24 V AC, 400 V DS, 24 V DC
(further electrical currents on request)

N1, N2, N3, N4, N4 A
(former types: WAN 1, WAN 2, WAN 3, WAN 4, WAN 4A)

The N series of our rotary and part-turn actuators is the standard series with a wide range of options within the Agromatic program of products. The wide range of torques from 1 Nm through to 60 Nm and numerous options ensure the N series is the optimum solution for applications in process plant engineering. The actuator is compatible or closed loop operations.

  • Wide torque range – 1 Nm – 60 Nm
  • Wide range of positioning times
  • Constant positioning times under fluctuating loads
  • Large number of auxiliary position switches possible
  • Electronic position controller ESR-N integrated in actuator
  • Wide selection of output shafts
  • Custom shafts possible
  • Solid metal housing
  • Maintenance-free gearbox
  • Operates in any position

More Less

Product category: Other control equipment

DR/SC Pneumatic part-turn actuator

DR/ SC 10, SC 15, SC 30, SC 60, SC 100, SC 150, SC 220, SC 300, SC 450, DR/ SC 600, SC 900, SC 1200, SC 2000, SC 3000, SC 4000, SC 5000, SC 10000

  • Complies with requirements for use in safety-related systems to EN 61508
  • Designed for use in zone 2 and zone 22
  • Wide torque range
  • Solid, corrosion-resistant housing made of aluminum
  • Maintenance-free
  • Operates in any position

 

More Less

Product category: Other control equipment

N8 Rotary and part-turn actuator

230 V AC, 115 V AC, 24 V AC, 400 V DS, 24 V DC
(further electrical currents on request)

(former type: WAN 8)

To increase the torque of N8 series solutions an additional gearbox is added to N1 to N4 A series actuators. This increases the available torque range up to 500 Nm.

The numerous options and actuators based on the same electrical design common to series N1 to N4 A ensure the N series is the optimum solution for applications in process plant engineering.

The design of the housing made of die-cast aluminium and die-cast zinc in combination with a permanently lubricated gearbox made of steel with sintered-bronze bearing bushes ensure their suitability for use in a broad range of temperatures and harsh operating environments. The actuator is compatible or closed loop operations.

  • Wide torque range – ≤ 500 Nm
  • Wide range of positioning times
  • Constant positioning times under fluctuating loads
  • Large number of auxiliary position switches possible
  • Electronic position controller ESR-N integrated in actuator
  • Wide selection of output shafts
  • Custom shafts possible
  • Solid metal housing
  • Maintenance-free gearbox
  • Operates in any position

More Less

Product category: Other control equipment

NK Part-turn actuator (compact design)

230 V AC, 115 V AC, 24 V DC
(further electrical currents on request)

The NK series of compact part-turn actuators is designed to control smaller and smooth-running valves utilized in industrial applications. The robust construction and metal housing made of a die-cast zinc alloy that offers protection class IP65 as well as the extremely compact design ensure these actuators are both suitable for harsh operating environments and installation in confined spaces.

When fitted with optional indicators and TUV-approved potentiometers for electronic fuel/air ratio control systems these compact actuators are ideally suited for use in industrial furnace installations and combustion plants.

  • Wide torque range
  • Wide range of positioning times
  • Constant positioning times under fluctuating loads
  • Up to four auxiliary position switches possible
  • Wide selection of output shafts
  • Custom shafts possible
  • Solid metal housing
  • Maintenance-free gearbox
  • Operates in any position

 

More Less

Product category: Other control equipment

NL Rotary and part-turn actuators (compact design)

230 V AC, 115 V AC
(andere Spannungen auf Anfrage)

The NL series is a favourably priced solution for applications in process plant engineering. The wide range of torques from 1 Nm through to 120 Nm ensures the NL series of part-turn actuator is a reliable solution for a multitude of applications.

The design of the housing made of die-cast aluminium and die-cast zinc in combination with a permanently lubricated gearbox made of steel with sintered-bronze bearing bushes ensure their suitability for use in a broad range of temperatures and harsh operating environments.

Utilizing an (optional) ESR-NL electronic position controller can simplify integrating rotary and part-turn actuators into the controls of complex systems. The actuator is compatible or closed loop operations.

  • Wide torque range – ≤ 120 Nm
  • Wide range of positioning times
  • Constant positioning times under fluctuating loads
  • Max. two additional auxiliary position switches possible
  • Electronic position controller ESR-N integrated in actuator
  • Wide selection of output shafts
  • Custom shafts possible
  • Solid metal housing
  • Maintenance-free gearbox
  • Operates in any position

More Less

Product category: Other control equipment

NV 5 – NV 6 closed loop actuator

230 V AC, 115 V AC, 24 V AC, 400 V DS, 24 V DC
(further electrical currents on request)

The NV5 – NV6 series was created from the N5 – N6 series. The primary objective was to fulfil a customer requirement for an actuator with integrated position sensing directly on the output shaft. A spacer ring created sufficient space to fit a potentiometer or an absolute encoder utilizing Hall effect sensing technology. Our solution means it is now possible to deploy a TUV-approved potentiometer for ratio control systems to DIN EN 12067-2:2004-06.

To satisfy customer demands to increase the service life of ratio control systems the rated torque was reduced and the bearings in the intermediate gearbox strengthened. These measures considerably increase service life of this part-turn actuator.

  • Wide torque range
  • Wide range of positioning times
  • Constant positioning times under fluctuating loads
  • Large number of auxiliary position switches possible
  • Custom shafts possible
  • Solid metal housing
  • Maintenance-free gearbox
  • Operates in any position

More Less

Product category: Other control equipment

Special solutions

More Less

Product category: Other control equipment

V Linear actuator

230 V AC, 115 V AC, 24 V AC, 400 V DS, 24 V DC
(further electrical currents on request)

(former type: WAV)

V series linear actuators are utilized when precision linear adjustments are required to control elements in heating, ventilation and air conditioning systems as well as in industrial applications. V series linear actuators are available with the following actuating forces: 1000 N, 2000 N, 3000 N, 4000 N and 5000 N plus a maximum stroke of 85 mm. The design of the housing made of die-cast aluminium and die-cast zinc in combination with a permanently lubricated gearbox made of steel with sintered-bronze bearing bushes ensure their suitability for use in a broad range of temperatures and harsh operating environments.

  • Wide range of force outputs
  • Large stroke range
  • Constant positioning times under fluctuating loads
  • Two additional force-sensitive switches possible
  • Four additional auxiliary position switches possible

 

  • Wide selection of column adapters
  • Wide selection of flanges
  • Solid metal housing
  • Maintenance-free gearbox
  • Operates in any position

 

More Less

Product category: Other control equipment

VK Linear actuator

230 V AC, 115 V AC
(further electrical currents on request)

The VK series of compact actuators are deployed in practically all fields of industry to perform sensitive adjustments to small or smoothly operating valves of all types of systems requiring stroke lengths up to 20 mm.

The robust construction, the metal housing made of die-cast zinc and an aluminium alloy that offers protection class IP65 and the extremely compact design ensure these valve actuators are the right solution even in harsh operating environments as well as confined spaces.

  • Constant positioning times under fluctuating loads
  • Up to four auxiliary position switches possible
  • Wide selection of valve adapters
  • Solid metal housing
  • Maintenance-free gearbox

More Less

About us

Company details

A powerful partner to industry
Since 1972 developer and manufacturer of electrical actuator.

After over 40 years of exclusive sale through the company Aris with Aris labels, the actuators are now sold directly by  Agromatic.

An Agromatic actuator is perfectly suited to move, regulate and control valves operating in all areas of industry. Agromatic actuators are reliable and durable with low maintenance costs.

Agromatic offers a wide range of electric actuators, which we develope and produce exclusively at Oerlinghausen/Germany (Made in Germany). Our range includes also electronic control components, motor-controlled valves, a comprehensive range of accessories and pneumatic actuators.

Our Team consists of qualified and highly motivated specialists, experts in the field of actuators for many years. We will always find a satisfactory solution for your specific needs.

Agromatic successfully supplies products to customers operating in a wide variety of markets including:

  • furnace installation and control
  • mechanical engineering
  • the automotive industry
  • marine engineering
  • quarrying for raw materials
  • energy generation
  • the food industry
  • pharmaceutical industry
  • ventilation and air-conditioning
  • the steel industry
  • the paper and glass industries
  • the petrochemical industry
  • power plant construction
  • water and wastewater treatment

and many more.

More Less

Company data

Sales volume

1-9 Mio US $

Export content

max. 50%

Number of employees

20-49

Foundation

1972

Company information as a PDF file