TECHMIRE

185 Voyageur, Pointe-Claire, H9R 6B2 Montréal, QC
Canada

Telephone +1 514 694-4110
Fax +1 514 694-2634
sconcilio@techmire.com

Location

Hall map

GIFA 2015 hall map (Hall 11): stand F42

Fairground map

GIFA 2015 fairground map: Hall 11

Contact

Sergio Concilio

Executive board/managing director
Business, corporate or plant management

185, Voyageur
Pointe-Claire, Quebec, Canada

Phone
514-694-4110 ext 235

Fax
514-694-2634

Email
sconcilio@techmire.com

Our range of products

Product categories

  • 10  Casting machines and pouring equipment
  • 10.02  Die-casting machinery and plant
  • 10.02.05  Warm chamber die-casting machinery

Warm chamber die-casting machinery

Our products

Product category: Warm chamber die-casting machinery

88MgX

Features of the MgX series include:

  • Die size up to 8"x10" (205x255mm) nominal.
  • Multiple slides, that are independently movable.
  • Shot weight up to 200g (7oz);
  • Adjustable stroke clamping system (for maximum cycle speed);
  • Quick die change system;
  • State-of-the-art forged steel gooseneck, which is electrically heated;
  • Replaceable hardened shot sleeve;
  • Electrically heated nozzle adapter (better temperature stability and longer life than gas heated);
  • Process parameters and shot monitoring system (PPCS);
  • Ingot pre-heating system, capable of automatically feeding two or more die-casting machines;
  • Electrically heated furnace (finer temperature control than gas heated);
  • Melt pot lined with a corrosion resistant coating for longer life;
  • Advanced shielding gas management system;
  • Touch screen operator interface;
  • Full array of safety features.

Techmire's MgX Series represents current state-of-the-art systems for the multiple-slide die-casting of precision components in magnesium alloys.

More Less

Product category: Warm chamber die-casting machinery

44NT

Techmire introduced the first of its NT Series of multiple-slide, high precision, hot chamber die-casting machines in 1994.

These machines are fully automatic, and can be used for the die-casting of zinc and lead alloys. The NT Series superseded the H Series, production of which stopped in 1998, although the earlier machines are still fully supported.

The NT Series are general-purpose machines, and have been improved continuously since first being introduced.

More Less

Product category: Warm chamber die-casting machinery

88NTX

The 88 NTX was developed for single cavity production of large surface area parts as well multiple cavity production of smaller components. It is the largest die-casting machine manufactured by Techmire. The 88 NTX machine is capable of reaching a dry cycle speed of 2,100 cycles per hour.

The 88 NTX is equipped with a quick die change system, which allow die changeover of a two (2) slide mold in as little as 15 minutes.

The NTX Series is Techmire's "premium" range of zinc and lead machines suitable for the widest range of applications in today’s demanding environment, and incorporates the latest advances in multiple-slide die-casting technology. The first NTX machine was introduced in 1999. The NTX Series features high capacity clamping systems, which are extremely rigid, and permit the use of greater metal pressures and injection velocities compared to the NT Series, resulting in superior surface finish and part density.

The NTX Series is complementary to the NT Series, and significantly increases the range of components that can be cost-effectively produced on Techmire machines.

More Less

Product category: Warm chamber die-casting machinery

24NTX

The 24 NTX is particularly suitable for casting very small, high precision components in multiple-cavity dies, at high speeds. The 24 NTX machine is capable of reaching a dry cycle speed of 4,500 cycles per hour.

The 24 NTX is also frequently used for components that are too large for the 22 NT, or that require especially high surface finish or density. The 24 NTX will accept dies from Techmire Model 22 and other four-slide die-casting machines.

The NTX Series is Techmire's "premium" range of zinc and lead machines suitable for the widest range of applications in today’s demanding environment, and incorporates the latest advances in multiple-slide die-casting technology. The first NTX machine was introduced in 1999. The NTX Series features high capacity clamping systems, which are extremely rigid, and permit the use of greater metal pressures and injection velocities compared to the NT Series, resulting in superior surface finish and part density.

The NTX Series is complementary to the NT Series, and significantly increases the range of components that can be cost-effectively produced on Techmire machines.

More Less

About us

Company details

Techmire is the world leader in the design and manufacture of multiple-slide die-casting systems for precision components in zinc, lead and magnesium alloys. Founded in 1973, and located in Montreal, Canada, Techmire has full turnkey systems capability, including design, manufacture and testing of die-casting machines and tooling, training of customers' operators and maintenance personnel, and full after-sales service. Re-manufacturing of Techmire die-casting systems and major components is also undertaken. Techmire has machines operating in more than 30 countries.

Techmire's line of multiple-slide, hot-chamber machines has the capability to economically produce complex zinc, magnesium and lead parts. The machines feature fully automatic operation for the highest degree of repeatability and reliability; parting line injection to significantly improve the shot-weight to part-weight ratio, by eliminating the sprue and reducing the runner system to a minimum. This results in savings in raw materials, lower energy costs, elimination of secondary trimming operations and faster cycle speeds. Cores can be pulled at any angle, in any direction, to provide complex die castings to keep tooling costs at a minimum.

Techmire provides cost-effective solutions to manufacturers of die cast components.

For additional information, visit www.techmire.com

More Less