Bianchi S.r.l.

Regione Cesolo, 13, 13011 Borgosesia (Vc)
Italy
Telephone +39 0163 22755
Fax +39 0163 27833
commerciale@bianchisrl.it

Location

Hall map

GIFA 2015 hall map (Hall 16): stand H20

Fairground map

GIFA 2015 fairground map: Hall 16

Contact

Alessandro Bianchi

Executive board/managing director
Business, corporate or plant management

Regione Cesolo, 13
13011 Borgosesia (Vc), Italy

Phone
+39 0163 22755

Fax
+39 0163 27833

Email
biancsrl@tin.it

Michela Bianchi

Executive board/managing director
Business, corporate or plant management

Regione Cesolo, 13
13011 Borgosesia (Vc), Italy

Phone
+39 0163 22755

Fax
+39 0163 27833

Email
commerciale@bianchisrl.it

Our range of products

Product categories

  • 05  Moulding and core making
  • 05.03  Core making machines and plants
  • 05.03.01  Core blowing and shooting machines and plants

Core blowing and shooting machines and plants

  • 11  Knock-out, fettling and finishing
  • 11.04  Fettling installations
  • 11.04.02  Sawing machines

Our products

Product category: Core blowing and shooting machines and plants

AUTOMATIC FAC 50

Fac 50 IS THE ELDER SISTER OF fac 25, strengthening all its characteristics of versatily, speed and method of use; it can operate in automatic, semiautomatic and manual cycles. It is an excellent machine for producing sanitary taps abd fittings with the HOT BOX system and, on request, with the SHELL MOULDING method (with pre-lined sand), as well as being the most suitable machine for producing water meters.

The reason for its creation lies in the requirements of a clientele more and more interested in bigger assembling moulds which can contain two or more casts in order ton increase production considerably.

The machine is supplied wuth electrical plates with an independent temperature control; the blowing head has a 5 lt capacity and the sand dosage to form the core is metered automatically through an electronic sensor which mesures the right quantity. The cores which, thanks to the new system of cast clamping, are of excellent quality, after baking are automaticlly deposited onto a conveyor belt which takes them directly to the operators position.

FAC 50 ELECTRON is also supplied with a control panel with PLC system complete with a display that signals the machine operations and carries out check-ups af any possible malfunction.

More Less

Product category: Sawing machines

AUTOMATIC CUT-OFF MACHINES TECNO 1ST/AR

The TECNO are COMPLETELY AUTOMATIC "CUT-OFF" MACHINES for the removal of casting runners, risers and flash, and capable of cutting on linear axis and curved radius.
The computer archive can remember up to 100 job programs and it’s possible to extend up to over a thousand.
On customer request, we can satisfy the specific necessities manufacturing machines with different size and capacity in order to cut pieces with dimensions up to 1,20 mt and up to 100 Kg max weight.
The TECNO are highly innovative because they have numerous advantages in comparison with the traditional methods and machines currently on the market

MAIN ADVANTAGES OF THE TECNO 2 ST/AR CUT-OFF MACHINE:

  • INCREASE OF PRODUCTION: as being a fully automatic machine, during the cutting cycle of the workpiece, the operator can do any other operation.
  • ABSOLUTE SAFETY (the operator always works outside the danger cutting zone)
  • PRECISION OF CUT (the machine cuts all the pieces in the same way)
  • CONSTANT AND CONTINOUS PRODUCTION (the machine cuts all the pieces over the same time avoiding loss of production due to the fatigue of the operator)
  • LONGER LIFE OF THE BLADES (the force, pressure and thrust of the piece on the blade is constant and always the same)
  • SIMPLE AND FAST PROGRAMMING (the “auto learning” system allows to program the machine very quickly and easily)
  • REDUCTION OF THE FATIGUE AND PSYCHO-PHYSICALSTRESS OF THE OPERATOR
  • REDUCED COST FOR WORKER (the machine doesn’t require skilled workman)
  • VERY LOW COST FOR THE VICE CLAMPING JIGS
  • VERY SHORT TIME TO CHANGE THE CLAMPING JIGS BETWEEN JOBS
  • LINEAR, SHAPED, RADIUS AND COMPLEX CUTS

 

More Less

About us

Company details

BIANCHI is a company founded by Mr. Bianchi Carlo in the early 70s as an individual company. In 1989 with the entry in the company of children, the company becomes BIANCHI SRL and becomes leader for the production of AUTOMATIC CORE SHOOTING MACHINES with HOT-BOX and SHELL MOLDING system.

Thanks to the long experience in foundries, in recent years the production has been enhanced with the new COMPLETELY AUTOMATIC CUT-OFF MACHINES FOR THE CUTTING OF SPRUE, RUNNERS, RISERS AND FLASHES of aluminium, brass, bronze and cast iron, WITH INDEPENDENT TWO CUTTING STATIONS.

The strengths that have always distinguished the machinery and the service given from BIANCHI company that today, more than the past, are an essential requirement for the customers are:

- Reliability and sturdiness
- Easiness programming and use
- Rapidity of preparation for the new production
- After-sale service with skilled engineers and technicians
- Well stocked on hand spare parts ready for delivery


The professionalism and the care of the products united to the about 40 years of experience allow to constantly be to the state-of-the-art one in the production of machines able to satisfy to the best the demands of the market and, the 1400 machines on the market in 57 different countries in the world, together-with the references of the most prestigious marks of the sector are the proof of it.

More Less

Company data

Export content

max. 75%