Sogemi Engineering S.r.l.

Via Gallarate, 209, 20151 Milano (Mi)
Italy
Telephone +39 02 38002400
Fax +39 02 89077108
info@sogemieng.it

Location

Hall map

GIFA 2015 hall map (Hall 16): stand F18

Fairground map

GIFA 2015 fairground map: Hall 16

Our range of products

Product categories

  • 02  Melting shop
  • 02.03  Fuel-heated melting and holding furnaces
  • 02.03.03  Rotary furnaces
  • 05  Moulding and core making
  • 05.02  Moulding machines and plants for non bentonite-bonded moulds
  • 05.02.01  Cold-setting resin moulding processes, equipment

Cold-setting resin moulding processes, equipment

  • 05  Moulding and core making
  • 05.04  Moulding and core making machines, accessories
  • 05.04.03  Mould handling equipment

Mould handling equipment

  • 07  Moulding sand preparation and sand reclamation
  • 07.01  Moulding sand preparation
  • 07.01.02  Moulding sand mixer

Moulding sand mixer

  • 07  Moulding sand preparation and sand reclamation
  • 07.01  Moulding sand preparation
  • 07.01.03  Crushing and grinding plants

Crushing and grinding plants

  • 07  Moulding sand preparation and sand reclamation
  • 07.01  Moulding sand preparation
  • 07.01.06  Sand coolers

Sand coolers

  • 07  Moulding sand preparation and sand reclamation
  • 07.01  Moulding sand preparation
  • 07.01.10  Separators for chromite and silica sand, zircon and silica sand

Separators for chromite and silica sand, zircon and silica sand

  • 07  Moulding sand preparation and sand reclamation
  • 07.01  Moulding sand preparation
  • 07.01.11  Moulding sand preparation, further equipment

Moulding sand preparation, further equipment

  • 07  Moulding sand preparation and sand reclamation
  • 07.02  Sand reclamation, plants and machines
  • 07.02.01  Sand reclamation of clay bonded moulding sands

Sand reclamation of clay bonded moulding sands

  • 07  Moulding sand preparation and sand reclamation
  • 07.02  Sand reclamation, plants and machines
  • 07.02.02  Sand reclamation of sodium silicate and cement bonded sands

Sand reclamation of sodium silicate and cement bonded sands

  • 07  Moulding sand preparation and sand reclamation
  • 07.02  Sand reclamation, plants and machines
  • 07.02.03  Sand reclamation of synthetic resin bonded sands

Sand reclamation of synthetic resin bonded sands

  • 15  Transportation and storage
  • 15.03  Pneumatic conveyors

Pneumatic conveyors

  • 24  Information processing
  • 24.07  Engineering services

Engineering services

Our products

Product category: Rotary furnaces

Products and Service

Sogemi has been designing and manufacturing foundry installation for more than 45 years.
Our production is divided into:

-RESIN SAND “NO-BAKE” MOULDING: Sogemi produces machines and installations for
resin sand moulding: mixers, complete moulding loop lines.

-SANDS RECLAMATION: installation for sand reclamation through “No-Bake” processes:
Mechanical Reclamation, Thermal Regeneration, Reclamation of sands bonded with
sodium silicate and Chromite separation from silica sand.
Thermal Mechanical Reclamation for sand bonded with inorganic binders.

-CAST IRON ROTARY MELTING FURNACES: Oxy-combustion rotary melting furnaces for
cast iron.

More Less

Product category: Rotary furnaces

Rotary Oxy-Combustion Melting Furnaces for Cast Iron

Sogemi has over twenty years of experience in the construction of cast iron melting rotary furnaces, developed with the aim of reducing running costs and in order to improve environmental impact, thereby reducing the levels of pollution arising from the melting process with a cupola furnace. Sogemi has thereby tackled these issues, in collaboration with the Air-Liquide Group, and has developed technology to ensure that rotary furnaces having a leading role to play in the foundry.

Sogemi has so far been responsible for the installation of over 100 plants worldwide, which cover all possible applications, from the smaller sized furnaces to the larger furnaces for mass production.

Sogemi furnaces distinguish themselves by virtue of the following:

  • Excellent heat transfer: flame at 2800°C, with a high degree of radiation and thermal exchange by the refractory material for conveyance thanks to the rotary motion.
  • Controlled melting in oxidizing or reducing environments, with rapid temperature increase (over 6°C a minute).
  • Rapid automatic loading and slag removal thanks to the possibility of inclining the furnace until it is in vertical position.

More Less

Product category: Moulding sand mixer

Continuous Mixers "RNK"

  • jib arm conveyor by self-empty belt
  • intensive mixing operation
  • automatic self-cleaning system with inhibitor
  • shaft easy maintenance, by covers book-opening
  • automatic control of cycle by PLC
  • output binders check display with automatic reset in case of variation*
  • check control of inlet sand temperature and consequent output catalyst reset*
  • output multi-programme pump set with instantaneous display of a.c.. motors speed with inverter
  • continuous recycle of binders
  • first mixed sand homogenisation by timed-automatic gate in mixer outlet
  • 180° rotation angle for Pivoting Mixer, 270° rotation angle for Articulated Mixer

More Less

Product category: Moulding sand preparation, further equipment

Sand Thermal Regeneration Plant with fluidized bed

The system has been designed after many studies and experiences with aim to have a plant really reliable with high performances and lower cost, able to solve for the foundries the problems of chemically bonded sand discharge.

The plant is characterised by:

  • Fluidized bed calcination chamber
  • Combustion with output self-regulation gas burner
  • Energetic reclamation with temperature exchange between calcinated sand and fluidized air
  • Automatic control with restore of sand weight into calcination chamber
  • Automatic sand dosing and discharging of treated sands
  • Final sand cooling to the required temperature
  • Pneumatic transport for feeding and sending of treated sands
  • Complete combustion of all possible polluting substances as required in EEC laws without post-combustion
  • Set of temperature automatic control equipment in all process steps and possibility of total control of plant with video supervision, on demand

More Less

About us

Company details

It's been more than 40 years since Sogemi started operating nationally and internationally, designing and building machinery and plants for second melting foundries: steel - cast iron and nonferrous metals.

Its presence in this field has been continually characterized by the pursuit of two specific goals:

  • development of new technologies with special attention to reclamation and recycling of materials with an eye on costs reducing;
  • attention to issues related to environmental ecology in compliance with current regulations, even the most restricted ones;

these principles have consistently led Sogemi in its activity, marked by so many achievements and many successes.

The consistency in pursuing the goals and cohesion of elements such as:

  • thorough knowledge of issues related to sand reclamation and regeneration;
  • extensive experience in the design and construction of "No-Bake" moulding lines;
  • proven knowledge of casting processes with Oxi-combustion rotary furnaces;
  • contribution of advanced technologies;
  • efficiency and reliability of plants;
  • competent and qualified technical advice;
  • after-sales service and supply of spare parts;

make Sogemi the ideal partner for foundries.

More Less

Company data

Sales volume

1-9 Mio US $

Export content

max. 75%

Number of employees

1-19