Split center bearing with water cooled housing and seals, 800 Series
(For Driven guide roll in slab caster)
Advantages and special features
-800 series, split center bearing with water cooled housing and seals, solves below problems
in driven guide roll in slab caster.
*Dust & Water contamination
*To be fitted on recessed shaft
-To dissipate heat in high temperature circumstance, cooling water is circulating through housing block.
-Specially designed sealing system enables to prevent foreign contaminants penetrating
into bearing block. Labyrinth ring is recommended to be installed between the housing
and roll by injection of sillicon.
-Every main component has two halves, exceptionally only one half of outer ring is fitted
in bottom of the housing block.
-Outer ring and inner ring has angled joints to ensure continuity of contact with rollers.
-Two halves of inner ring are fully fitted on shaft by two clamping rings.
-When fitting two halves of inner ring on shaft, there should be a gap at the joint in order
to ensure full contact between the bore of inner ring and shaft. Tha gaps differ from the
sizes,0.35mm to 0.55mm.
-Easy fitting and dismantling.