Friedrich Vollmer Feinmessgerätebau GmbH
Verbandsstr. 60b,
58093
Hagen
Germany
Germany
Location
Hall map
Fairground map
Our range of products
Product categories
- 10 Electrical engineering and process control technology
- 10.02 Process control technology and automation
Process control technology and automation
- 11 Measurement and test technology
- 11.01 Measurement of physical properties and quantities
Measurement of physical properties and quantities
Our products
Product category: Measurement of physical properties and quantities
Laser Gauges
The new standard for precision and speed
With the new VTLG Series laser systems, Vollmer is giving strip thickness measurement new impetus: They combine the highest precision with rolling mill-oriented design. Thanks to their unique measuring method, they are suitable for use in cold rolling mills. With a measuring precision of ± 1 µm and scanning rate of 50 kHz, they offer the precision and speed necessary for the control of the strip thickness.
VTLG systems are the only laser gauges to measure the strip thickness during rolling in the mill, thus opening up completely new possibilities in production and quality assurance for our customers.
WAs with our contact gauges, they measure the thickness irrespective of the alloy – ideal preconditions for use in the rolling mill, but also on the annealing line, in the finishing section, on the strip edge miller or in the steel service centre.
Simple and safe
An automatic air cleaning system for the measuring window and beam path and the innovative temperature compensation ensure the highest precision even under difficult environmental conditions. As the lasers conform to laser protection class 3B, no additional beam protection guards are necessary.
With the new VTLG Series laser systems, Vollmer is giving strip thickness measurement new impetus: They combine the highest precision with rolling mill-oriented design. Thanks to their unique measuring method, they are suitable for use in cold rolling mills. With a measuring precision of ± 1 µm and scanning rate of 50 kHz, they offer the precision and speed necessary for the control of the strip thickness.
VTLG systems are the only laser gauges to measure the strip thickness during rolling in the mill, thus opening up completely new possibilities in production and quality assurance for our customers.
WAs with our contact gauges, they measure the thickness irrespective of the alloy – ideal preconditions for use in the rolling mill, but also on the annealing line, in the finishing section, on the strip edge miller or in the steel service centre.
Simple and safe
An automatic air cleaning system for the measuring window and beam path and the innovative temperature compensation ensure the highest precision even under difficult environmental conditions. As the lasers conform to laser protection class 3B, no additional beam protection guards are necessary.
Product category: Process control technology and automation, Measurement of physical properties and quantities
Contact Gauges
Proven for decades
The contact gauges that measure the thickness of the strip with an accuracy of a few micrometres are renowned for their outstanding precision and exceptional reliability: Almost 2000 systems that have gone into operation worldwide in recent decades are still in use even today.
They still form an integral part of the measurement technology in new plants where the highest precision is demanded.
Flexible from 0.01 to 24 mm
Tactile measurement is employed at all stages of the strip production process – on the annealing line and during rolling, on the finishing line or during strip processing as well as in the steel service centre. Vollmer delivers the systems in different versions for thicknesses from 0.01 to 24 mm.
Precise even on wavy strip
With a measuring precision of down to one micrometre per millimetre of strip thickness, they meet the demands of modern rolling mills. Contact gauges adapt to the strip passage and follow any waviness of the material. They thus compensate angular errors by actively adjusting the sensors perpendicularly to the wavy strip material.
The contact gauges that measure the thickness of the strip with an accuracy of a few micrometres are renowned for their outstanding precision and exceptional reliability: Almost 2000 systems that have gone into operation worldwide in recent decades are still in use even today.
They still form an integral part of the measurement technology in new plants where the highest precision is demanded.
Flexible from 0.01 to 24 mm
Tactile measurement is employed at all stages of the strip production process – on the annealing line and during rolling, on the finishing line or during strip processing as well as in the steel service centre. Vollmer delivers the systems in different versions for thicknesses from 0.01 to 24 mm.
Precise even on wavy strip
With a measuring precision of down to one micrometre per millimetre of strip thickness, they meet the demands of modern rolling mills. Contact gauges adapt to the strip passage and follow any waviness of the material. They thus compensate angular errors by actively adjusting the sensors perpendicularly to the wavy strip material.
Product category: Measurement of physical properties and quantities
Visualisation and Evaluation
50 years of measurement and assessment of strips means extensive experience in the visualisation and analysis of the data. Our visualisation and evaluation software is therefore specially tailored to the needs of strip assessment, for long strips and with a high measurement point density. It offers numerous editing and evaluation modes configured specially for the demands of strip production.
Vollmer offers two basic products:
VGraph: The comprehensive software for the recording and visualisation of the measurement data with statistical data evaluation and a wide array of options
VRecoS: The system for the visualisation and recording of data which essentially replaces the paper plotters previously used
The Office option with both products allows later evaluation and editing of the data on other computers in the customer's works.
Vollmer offers two basic products:
VGraph: The comprehensive software for the recording and visualisation of the measurement data with statistical data evaluation and a wide array of options
VRecoS: The system for the visualisation and recording of data which essentially replaces the paper plotters previously used
The Office option with both products allows later evaluation and editing of the data on other computers in the customer's works.
About us
Company details
Looking at the whole process
With its decades of know-how and experience, Vollmer has vast competence that is unique worldwide. Whether planning, production at the Hagen works, installation, integration into the existing production environment, commissioning and operator training on site – Vollmer offers solutions from a single source.
Thanks to the optimum infrastructure built up over the course of the years, Vollmer provides quick and reliable service around the globe. The staff at our branches and sales offices worldwide are regularly trained and familiarised with the latest technology. Furthermore Vollmer furnishes proof of the measuring instrument capability and certifies customers' gauge blocks in its own calibration laboratory.
With its decades of know-how and experience, Vollmer has vast competence that is unique worldwide. Whether planning, production at the Hagen works, installation, integration into the existing production environment, commissioning and operator training on site – Vollmer offers solutions from a single source.
Thanks to the optimum infrastructure built up over the course of the years, Vollmer provides quick and reliable service around the globe. The staff at our branches and sales offices worldwide are regularly trained and familiarised with the latest technology. Furthermore Vollmer furnishes proof of the measuring instrument capability and certifies customers' gauge blocks in its own calibration laboratory.