Nabertherm GmbH
Bahnhofstr. 20,
28865
Lilienthal
Germany
Germany
Location
Hall map
Fairground map
Our range of products
Product categories
- 02 Melting shop
- 02.02 Electric melting and holding furnaces (pouring equipment see 10.01)
- 02.02.04 Melting and holding furnaces, electric resistance type
Melting and holding furnaces, electric resistance type
- 02 Melting shop
- 02.03 Fuel-heated melting and holding furnaces
- 02.03.01 Crucible melting and holding furnaces, fuel-heated
Crucible melting and holding furnaces, fuel-heated
- 14 Heat treating and drying furnaces
- 14.04 Heat treating furnaces and installations
Heat treating furnaces and installations
- 01 Industrial Furnaces, Industrial Heat Treatment Plants and thermal processes for
- 01.05 Hard Metals
- 01.05.02 Debinding
Debinding
- 01 Industrial Furnaces, Industrial Heat Treatment Plants and thermal processes for
- 01.05 Hard Metals
- 01.05.05 Vacuum sintering
Vacuum sintering
- 01 Industrial Furnaces, Industrial Heat Treatment Plants and thermal processes for
- 01.06 Ceramics
- 01.06.02 Sintering
Sintering
- 01 Industrial Furnaces, Industrial Heat Treatment Plants and thermal processes for
- 01.07 Non-ferrous metals
- 01.07.04 Brazing
Brazing
- 01 Industrial Furnaces, Industrial Heat Treatment Plants and thermal processes for
- 01.07 Non-ferrous metals
- 01.07.05 MIM (Metall Injection Moulding)
MIM (Metall Injection Moulding)
- 01 Industrial Furnaces, Industrial Heat Treatment Plants and thermal processes for
- 01.07 Non-ferrous metals
- 01.07.13 Heat treating
- 01.07.13.04 Solution annealing
Solution annealing
- 01 Industrial Furnaces, Industrial Heat Treatment Plants and thermal processes for
- 01.07 Non-ferrous metals
- 01.07.13 Heat treating
- 01.07.13.05 Artificial ageing
Artificial ageing
Our products
Product category: Melting and holding furnaces, electric resistance type
Alternative Melting Furnace Concepts
Alternative Heating Technologies
The application of alternative heating technologies depends on the requirements for melt quality, productivity and energy efficiency. In principle either electrically or gas-fired furnaces can be used. In this context, with respect to costs the local pricing for the alternative energy play a decisive role.
Gas-Fired
Gas-fired furnaces are ideal for melting, particularly if equipped with exhaust gas discharge over the crucible edge. Side exhaust gas discharge is best if a high melt quality is required. However, a higher melt quality means a lower energy efficiency since a fuel-fired furnace with side exhaust gas discharge consumes approx. 20-25 % more energy than a furnace with an exhaust gas discharge over the crucible edge.
Fuel-fired furnaces provide for optimal energy efficiency in combination with highest melt quality due to their burner system that includes heat recovery via recuperator. The hot exhaust gases from the furnace preheat the combustion air for the burner via a heat exchanger. This system leads to savings of up to 25 % compared to conventional fuel-fired furnaces with a side exhaust gas discharge.
Electric Heating
If the melt quality and energy efficiency take priority, an electrically heated furnace is the best choice. The heating is controlled very steadily and precisely. The melt is not polluted through immissions from a fuel-fired heating. Electrically heated furnaces can achieve up to 85 % of the melting performance of fuel-fired furnaces with a side exhaust gas discharge. If the furnaces are used only for holding, we recommend the T…/10 models, which are very energy efficient due to their very good insulation and reduced connected load.
The application of alternative heating technologies depends on the requirements for melt quality, productivity and energy efficiency. In principle either electrically or gas-fired furnaces can be used. In this context, with respect to costs the local pricing for the alternative energy play a decisive role.
Gas-Fired
Gas-fired furnaces are ideal for melting, particularly if equipped with exhaust gas discharge over the crucible edge. Side exhaust gas discharge is best if a high melt quality is required. However, a higher melt quality means a lower energy efficiency since a fuel-fired furnace with side exhaust gas discharge consumes approx. 20-25 % more energy than a furnace with an exhaust gas discharge over the crucible edge.
Fuel-fired furnaces provide for optimal energy efficiency in combination with highest melt quality due to their burner system that includes heat recovery via recuperator. The hot exhaust gases from the furnace preheat the combustion air for the burner via a heat exchanger. This system leads to savings of up to 25 % compared to conventional fuel-fired furnaces with a side exhaust gas discharge.
Electric Heating
If the melt quality and energy efficiency take priority, an electrically heated furnace is the best choice. The heating is controlled very steadily and precisely. The melt is not polluted through immissions from a fuel-fired heating. Electrically heated furnaces can achieve up to 85 % of the melting performance of fuel-fired furnaces with a side exhaust gas discharge. If the furnaces are used only for holding, we recommend the T…/10 models, which are very energy efficient due to their very good insulation and reduced connected load.
Product category: Heat treating furnaces and installations
Chamber furnace NB 4330/S
Certain heat treatment processes require a gas-fired chamber furnace. Short heating times due to the high power are a convincing argument. The chamber furnaces with powerful atmospheric gas burners cover a wide variety of these processes. In the basic version the burners are manually ignited once at the start of the process. The automatic control system then takes over control of the temperature curve. At program end, the burners are automatically switched off. Depending on the process, the furnaces can be equipped with automatically controlled fan burners and safety technology for debinding. Depending on the model, these furnaces can be upgraded with fully automatic fan burners and additional accessories.
- Tmax 1300 °C
- Powerful, atmospheric burners for operation with liquified gas or natural gas
- Depending on the application, special positioning of the gas burners with flame guidance provides for optimal temperature uniformity
- Fully automatic temperature control
- Gas fittings with flame control and safety valve in accordance with DVGW (German Technical and Scientific Association for Gas and Water)
- Multi-layer, reduction-proof insulation with light-weight refractory bricks and special back-up insulation result in low gas consumption
- Self-supporting and rugged ceiling, bricks laid in arched construction. Only fiber materials are used which are not classified as carcinogenic according to TRGS 905, class 1 or 2.
- Exhaust hood
- Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load
- Defined application within the constraints of the operating instructions
Product category: Heat treating furnaces and installations
Chamber Ovens Electrically Heated or Gas-Fired
The chamber ovens of the KTR range can be used for complex drying processes and heat treatment of charges to an application temperature of 260 °C. The high-performance air circulation enables optimum temperature uniformity throughout the work space. A wide range of accessories allow the chamber ovens to be modified to meet specific process requirements. The design for the heat treatment of flammable materials in conformance with EN 1539 (NFPA 86) is available for all sizes.
- Tmax 260 °C
- Electrically heated (via a heating register with integrated chrome steel heating elements) or gas-fired (direct or indirect gas-fired including injection of the hot air into the intake duct)
- Temperature uniformity up to +/- 3 °C according to DIN 17052-1 (for design without track cutouts)
- High-quality mineral wool insulation provides for outer temperatures of < 25 °C above room temperature
- Only fiber materials are used which are not classified as carcinogenic according to TRGS 905, class 1 or 2
- High air exchange for fast drying processes
- Double-wing door for furnaces KTR 3100 and larger
- Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the oven and load
- Incl. floor insulation
- Defined application within the constraints of the operating instructions
- NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive
About us
Company details
Made in Germany
Nabertherm with 500 employees worldwide have been developing and producing industrial furnaces for foundry aswell as for many different applications for over 70 years. As a manufacturer, Nabertherm offers a wide and deep range of furnaces worldwide. 150,000 satisfied customers in more than 100 countries offer proof of our commitment to excellent design, quality and cost efficiency. Short delivery times are ensured due to our complete inhouse production and our wide variety of standard furnaces.
Setting Standards in Quality and Reliability
Nabertherm does not only offer a wide range of standard furnaces. Professional engineering in combination with inhouse manufactoring provide for individual project planning and construction of tailor-made thermal process plants with material handling and charging systems. Complete thermal processes are realized by customized system solutions.
Innovative Nabertherm control technology provides for precise control as well as full documentation and remote monitoring of your processes. Our engineers apply state-of-the-art technology to improve the temperature uniformity, energy efficiency, reliability and durability of our systems with the goal of enhancing your competitive edge.
Global Sales and Service Network – Close to you
Nabertherm´s strength is one of the biggest R&D department in the furnace industry. In combination with central manufacturing in Germany and decentralized sales and service close to the customer we can provide for a competitive edge to live up to your needs. Long term sales and distribution partners in all important world markets ensure individual on-site customer service and consultation. There are various reference customers in your neighborhood who have similar furnaces or systems.
Large Customer Test Center
Which furnace is the right choice for this specific process? This question cannot always be answered easily. Therefore, we have set up our modern test center which is unique in respect to size and variety. A representative number of furnaces is available for tests for our customers.
Customer Service and Spare Parts
Our professional service engineers are available for you worldwide. Due to our complete inhouse production, we can despatch most spare parts from stock over night or produce with short delivery time.
Experience in Many Fields of Thermal Processing
In addition to furnaces for thermal process technology, Nabertherm offers a wide range of standard furnaces and plants for many other thermal processing applications. The modular design of our products provides for customized solutions to your individual needs without expensive modifications.
Nabertherm with 500 employees worldwide have been developing and producing industrial furnaces for foundry aswell as for many different applications for over 70 years. As a manufacturer, Nabertherm offers a wide and deep range of furnaces worldwide. 150,000 satisfied customers in more than 100 countries offer proof of our commitment to excellent design, quality and cost efficiency. Short delivery times are ensured due to our complete inhouse production and our wide variety of standard furnaces.
Setting Standards in Quality and Reliability
Nabertherm does not only offer a wide range of standard furnaces. Professional engineering in combination with inhouse manufactoring provide for individual project planning and construction of tailor-made thermal process plants with material handling and charging systems. Complete thermal processes are realized by customized system solutions.
Innovative Nabertherm control technology provides for precise control as well as full documentation and remote monitoring of your processes. Our engineers apply state-of-the-art technology to improve the temperature uniformity, energy efficiency, reliability and durability of our systems with the goal of enhancing your competitive edge.
Global Sales and Service Network – Close to you
Nabertherm´s strength is one of the biggest R&D department in the furnace industry. In combination with central manufacturing in Germany and decentralized sales and service close to the customer we can provide for a competitive edge to live up to your needs. Long term sales and distribution partners in all important world markets ensure individual on-site customer service and consultation. There are various reference customers in your neighborhood who have similar furnaces or systems.
Large Customer Test Center
Which furnace is the right choice for this specific process? This question cannot always be answered easily. Therefore, we have set up our modern test center which is unique in respect to size and variety. A representative number of furnaces is available for tests for our customers.
Customer Service and Spare Parts
Our professional service engineers are available for you worldwide. Due to our complete inhouse production, we can despatch most spare parts from stock over night or produce with short delivery time.
Experience in Many Fields of Thermal Processing
In addition to furnaces for thermal process technology, Nabertherm offers a wide range of standard furnaces and plants for many other thermal processing applications. The modular design of our products provides for customized solutions to your individual needs without expensive modifications.