A. Cesana S.r.l.

Via F. Turati 23, 20016 Pero (MI)
Italy
Telephone +39 02 3534941
Fax +39 02 3390714
info@acesana.com

Hall map

GIFA 2019 hall map (Hall 12): stand E41

Fairground map

GIFA 2019 fairground map: Hall 12

Contact

Alberto Francesco Cesana

General Manager

Phone
+39 023534941

Email
info@acesana.com

Luca Cesana

General Manager

Phone
+39 023534941

Email
info@acesana.com

Visit us

Hall 12 / E41

25.06.2019

Topic

17:00 - 18:00

Let's celebrate together the 140th anniversay of our company! At our stand at 5 p.m. Italian aperitif and snack

26.06.2019

Topic

17:00 - 18:00

Let's celebrate together the 140th anniversay of our company! At our stand at 5 p.m. Italian aperitif and snack

27.06.2019

Topic

17:00 - 18:00

Let's celebrate together the 140th anniversay of our company! At our stand at 5 p.m. Italian aperitif and snack

Our range of products

Product categories

  • 06  Moulding sands
  • 06.03  Moulding sand additives, coatings for moulds and cores
  • 06.03.03  Mould and core coatings
  • 10  Casting machines and pouring equipment
  • 10.03  Peripheral equipment and auxiliary materials for die casting (die casting dies see 17.03.01)
  • 10.03.04  Release agents for die-casting

Release agents for die-casting

  • 19  Measurement and test technology
  • 19.01  Measuring instruments
  • 19.01.03  Aluminium melt testing equipment

Aluminium melt testing equipment

Our products

Product category: Melt treatment stations

DUAL SEF - Rotor degassing station to perform automatic treatment cycles with flux dosing and data recorder

Dual Sef  latest technology controller, inverter, data logger, granular flux addition, ladle position sensor, Long Life Silicon carbide shaft and rotor. The unit is programmable to operate on different capacity ladles from 200 up to 1500 kg capacity of Aluminium.
The cycle is programmable for different alloys and easy to operate. It is completely automatic and there is no need for the operator to be present. The addition of drossing flux in granular form will generate a cleaner melt, free from oxides and a dry dross will remain on the top of the melt.This unit guarantees a consistent reduction in flux consumption and a optimization in saving on shaft/rotors costs.
Come and find out more at our stand E41 in Hall 12 !

More Less

Product category: Melt treatment stations

DUAL 2 - Easy transportable rotor degassing unit for Aluminium foundries

The unit has been designed and constructed for Aluminium foundries operating with rotary degassing treatment. The controlled rotation of a graphite and/or Silicon Carbide shaft and impeller distributes a stream of micronized Nitrogen  (or Argon)  bubbles which will eliminate prosities and force to surface all impurities and oxides. Automatic flux addition dispenser and twisting paddle available on request. Unit can be easily transported by fork lift or crane.

Come and find out more at our stand E41 in Hall 12 !

More Less

Product category: Melt additives and covering fluxes for non-ferrous cast alloys

ALUXAL & ALUCLEAN: fluxes, in powder form, for the protecting, covering, cleansing, drossing-off and modifying of all types of Aluminium alloys

The Aluxal  and Aluclean fluxes act, during melting operations, as protecting coves of the charge reducing oxidation of the metal and Hydrogen pick-up. The fluxes also remove and dissolve non metallic inclusions. The drosses floating on the bath surface have therefore lower metal content and are easier to remove. Life of crucible and refractories increases. Purity of metals will be  with high quality standard  .
Modifying fluxes, Sodium based, have various compositions to please temperature  and alloy . The modification treatment, recommended for Aluminium-Silicon alloys, increases the physical properties like elongation, ductility and  tensile strength. The introduction of Sodium into the metal reduces the coarse crystals of Silicon into fine globular  structures.
The Aluxal and Aluclaean range includes:
• covering, scorifying, drossing off fluxes for Aluminium alloys melted in crucible furnaces, or baled out from the side port  of  radiant  and reverberatory furnaces
• “Sodium free” cleansing, protecting, drossing-off fluxes for Aluminium-Magnesium  and high Silicon alloys
• refining, covering, drossing-off fluxes for  reverberatory melting furnaces
• modifying fluxes for the metallurgical treatment of eutectic Aluminium alloys containing 9-13% Silicon
Come and find out more at our stand E41 in Hall 12!

More Less

Product category: Melt additives and covering fluxes for non-ferrous cast alloys

CRYSTAL range - Covering - drossing flux, in granular form for treatments on molten aluminium alloys.

Crystal  is produced in granular form and has an improved formulation to perform effective covering and drossing on molten aluminium alloys. The product is normally recommended for melts standing in melting furnace, in transport ladles or during rotor degassing in ladles and crucibles. The formulation is based on inorganic and natural blended salts. This gives no fumes, no burning drosses and other risks during handling and use. The flux is not suitable for those alloys not tolerating the presence of sodium.
Come and find out more at our stand E41 in Hall 12!

More Less

Product category: Mould and core coatings

METALCOTE range: Dressings for gravity and low pressure casting of Aluminium alloys. Protecting coatings for tools, ladles and launders

The Metalcote range consists of products especially formulated to protect the machines faces of dies and cores. The types with insulating properties are recommended to control solidification of the casing, to give smooth or rough surface finish and to facilitate die operation. The types with lubricating properties are recommended and used to lubricate the die mechanisms, slides and core prints. Water suspended graphite lubricants are sometime applied on top of an insulating dressing to assist release of tight casting and cores. The Metalcote range, being water based, is completely safe and is formulated to provide effective performances in difficult environments. The Metalcote range includes:                                   
  • insulating dressing types
  • heat conductive types
  • coatings for low pressure dies
  • protective coatings
Come and find out more at our stand E41 in Hall 12!

More Less

Product category: Melt additives and covering fluxes for non-ferrous cast alloys

ELIDRON TABLETS: degassing, grain refining and deoxidising tablets

Special fluxes intended for degassing aluminum and its alloys. Plunged in the metal bath, they produce an energetic chemical reaction that eliminates the hydrogen present in the metal. Some types of Elidron combine the degassing action with a marked refining action of the grains. They are packaged in tablets in different weights.

Come and find out more at our stand E41 in Hall 12 !

More Less

Product category: Melt additives and covering fluxes for non-ferrous cast alloys

GERMINAL: grain refining tablets

Special preparations to give a push to refine the grains of Aluminum and its alloys. Their action is due to Boron and Titanium, elements that have shown to have a remarkable refining action on Aluminum. The Aluminum and its alloys treated with Germinal undergo a notable improvement in the mechanical characteristics and resist much better to high pressures.
Come and find out more at our stand E41 in Hall 12!

More Less

Product category: Release agents for die-casting

LUBRIX range

Lubrix, a new products range including release-agent for HDPC, greases and pastes, solid wax lubes, special compounds for the cast iron ladles or tools in contact with molten Aluminium and moving die mechanism.
Low residues
High temperature
Long life
Easy removal of frozen skull
Come and find out more at our stand E41 in Hall 12 !

More Less

Product category: Melt treatment stations

ERBO - Electric resistance crucible furnace

Electric resistance crucible furnace  with electronic thyristor power control for high efficency , low consumptions and accurate metal temperature variations.
Capacity range :  120- 1.300 Kg. Aluminium.

Come and find out more at our stand E41 in Hall 12 !

More Less

Product category: Melt treatment stations

MELTING CRUCIBLES

Crucibles for  melting  of Aluminium , Zinc and Copper alloys
Crucibles for investement casters and for precious metals

Come and find out more at our stand E41 in Hall 12 !

More Less

About us

Company details

For 140 years A.CESANA S.r.l. has been a leading European manufacturer of metallurgical treatment products for non-ferrous alloys, foundry machines and equipments. 
Our product range includes:
  • Covering  fluxes
  • Reduction of Alkaline elements (Calcium or Magnesium)
  • Drossing-off fluxes
  • Deoxidizing fluxes
  • Modification fluxes
  • Degassing tablets
  • Covering tablets
  • Master alloys (Ti, Sr, Mn, Fe)
  • Grain refining tablets Titanium + Boron base
  • Sodium modification tablets
  • Metallic sodium tins
  • Exothermic powders
  • Full range of coatings for gravity and low pressure die-casting
  • Long life coatings for gravity and low pressure die-casting
  • Water-based graphite coatings
  • Water-based semi-colloidal graphite coatings 
  • Water-based colloidal graphite coatings
  • Water based ceramic coatings
  • Water-based Boron Nitride coatings
  • Refractory coatings for molds and cores
  • Water-based lubricants for high pressure die-casting
  • Oils for pressure die-casting machines
  • Aluminium Foundries : technical consulting and problem solving on site
The equipments for the non-ferrous melting industry are:
  • Stationary and portable degassing units
  • Coating mixer units
  • Flux injection units
  • Molten metal gas control units
  • Ladle heaters with low noise &  very low gas consumption
  • Flux dosing units in ladles or launders
  • Density index analizers
  • Special equipments for cast houses and for special applications
  • Crucible  electric Furnaces 
  • Transport ladles lined with monolithic crucible
Would you like to know more on  A. CESANA S.r.l. and  on our products, equipments and effective solutions
Meet us at stand 12/E41 Hall 12, our competent staff will welcome you


































































































































































More Less

Company data

Sales volume

1-9 Mio US $

Export content

max. 50%

Number of employees

20-49

Foundation

1879

Area of business
  • Foundry plants and installations, planning, construction, engineering
  • Melting shop
  • Metallic charge materials
  • Moulding and core making
  • Moulding auxiliaries
  • Casting machines and pouring equipment
  • Measurement and test technology
  • Consultation, planning, services

Company information as a PDF file