Manage stand orders
Select Option

KULLEN-KOTI GmbH

Postfach 2044, 72710 Reutlingen
Am Heilbrunnen 83, 72766 Reutlingen
Germany
Telephone +49 7121 142-0
Fax +49 7121 142-260
post@kullen.de

Hall map

METEC 2019 hall map (Hall 5): stand E01

Fairground map

METEC 2019 fairground map: Hall 5

Our range of products

Product categories

  • 04  Plant and equipment for non-ferrous metal production
  • 04.06  Components, ancillary equipment

Components, ancillary equipment

  • 05  Plant and equipment for casting and pouring of molten steel
  • 05.05  Components, ancillary equipment

Components, ancillary equipment

  • 06  Plant and equipment for casting and pouring of non-ferrous metals
  • 06.05  Components, ancillary equipment

Components, ancillary equipment

  • 07  Plant and equipment for shaping of steel
  • 07.02  Hot strip mills

Hot strip mills

  • 07  Plant and equipment for shaping of steel
  • 07.03  Combined thin slab casting and rolling mills

Combined thin slab casting and rolling mills

  • 07  Plant and equipment for shaping of steel
  • 07.10  Cold rolling mills
  • 07  Plant and equipment for shaping of steel
  • 07.11  Skin pass rolling mills

Skin pass rolling mills

  • 07  Plant and equipment for shaping of steel
  • 07.12  Strip processing lines

Strip processing lines

  • 07  Plant and equipment for shaping of steel
  • 07.17  Reheating and heat treating furnaces

Reheating and heat treating furnaces

  • 07  Plant and equipment for shaping of steel
  • 07.18  Hydroforming

Hydroforming

  • 07  Plant and equipment for shaping of steel
  • 07.19  Rolls for hot rolling mills
  • 07  Plant and equipment for shaping of steel
  • 07.20  Rolls for cold rolling mills

Rolls for cold rolling mills

  • 07  Plant and equipment for shaping of steel
  • 07.21  Components, ancillary equipment

Components, ancillary equipment

  • 08  Plant and systems for shaping of non-ferrous metals
  • 08.01  Hot rolling mills

Hot rolling mills

  • 08  Plant and systems for shaping of non-ferrous metals
  • 08.02  Cold rolling mills

Cold rolling mills

  • 08  Plant and systems for shaping of non-ferrous metals
  • 08.04  Wire mills

Wire mills

  • 08  Plant and systems for shaping of non-ferrous metals
  • 08.05  Strip processing lines

Strip processing lines

  • 08  Plant and systems for shaping of non-ferrous metals
  • 08.08  Reheating and heat treating furnaces

Reheating and heat treating furnaces

  • 08  Plant and systems for shaping of non-ferrous metals
  • 08.09  Components, ancillary equipment

Components, ancillary equipment

  • 09  Plant and systems for environmental protection and disposal, gas purification
  • 09.01  Dust extraction and gas purification

Dust extraction and gas purification

  • 09  Plant and systems for environmental protection and disposal, gas purification
  • 09.04  Water management and waste water cleaning

Water management and waste water cleaning

  • 09  Plant and systems for environmental protection and disposal, gas purification
  • 09.05  Noise - protecting installation

Noise - protecting installation

Our products

Product category: Cold rolling mills

DBS-Spiral Roller Brushes type 220 and type 221

The types 220 & 221 are extremly flexible in their dimension and depending on the required performance these endless spiral brush coils are mounted on core systems made of mild steel, stainless steel or non ferrous metals.Compared with other brush designs we can reach the highest possible fill density with these types and they can be applied with a maximum speed of 55 m/sec without any problems. Supposition for it, is that the roller brush cores are electrodynamically balanced after the mounting of the core according to the required rotation speed and quality G 2.5 which comes up to ISO 1940.

More Less

Product category: Rolls for cold rolling mills

DBS-Spiral Brushes type 231

Our roller brush coil designed as welded package system will also pack the tiger in your tank! Why is it reasonable and advantageous to purchase a welded package system type 231? Each face width of a roller brush needed can be divided in a corresponding number of single, compact segments, called packages, that are not only loosley coiled spirals. What we produce are light and easy-to-handle packages with a constant high density which facilitates and accelerates the equipping of a brush core or shaft carried out by yourself.The welded package system is not only easy to mount but it also makes you independent of any transportation of the core to the supplier for refilling, packing, delivery times etc. and helps you out of emergency situations.For the core constructions the following materials are available: plastic-coated steel, steel, stainless steel (1.4301; 1.4571; 2.4879).

More Less

Product category: Rolls for hot rolling mills

DBS-Spiral Roller Brushes, type 230 and type 230/VDS

A further variation of the "Throw-Away" system is type 230. It consists of continuously wound DBS-spiral brushes fitted to a thin walled steel, stainless steel or non-ferrous metal tubular shaft. The face width corresponds to the required total brush legth (BLG). The complete "Throw-Away" brushes can be simply assembled onto the customer's existing shaft. This method avoids the costly return of the complete shafts when the brushes have to be replaced.

More Less