Manage stand orders
Select Option

Erdwich Zerkleinerungs-Systeme GmbH

Gewerbestr. 6, 86859 Igling
Telephone +49 8191 9652-0
Fax +49 8191 9652-16

Hall map

GIFA 2019 hall map (Hall 16): stand E25

Fairground map

GIFA 2019 fairground map: Hall 16


Ulrich Kanzleiter


Maximilian Gutmayr

Please log in

You must be logged in to use matchmaking

Please log in for matchmaking

Registration is required to use the networking service and a separate registration for matchmaking. Please register for Matchmaking first.

Let's get started!

Welcome to Matchmaking. Would you like to get in touch with ?

Our range of products

Product categories

  • 01  Foundry plants and installations, planning, construction, engineering

Foundry plants and installations, planning, construction, engineering

  • 22  Environmental protection and waste removal
  • 22.06  Foundry waste preparation plants

Our products

Product category: Foundry waste preparation plants

ERDWICH Three-Shaft Shredder

The experts for bulky materials!
The uniform shredding of coarse materials: that’s the speciality of the ERDWICH three-shaft shredder. ERDWICH has created the three-shaft design especially for these requirements. Entirely free of clogging and jamming – even with solid materials. Clever, huh?

Absolutely: after all, the three cutter shafts and their individual sets of blades rotate at different speeds, so as to continuously pull in and precisely shred the feedstock material. If the material is too large, the sweeper shaft simply transfers the material to the lower cutter shafts for further size reduction. Again and again – until the material is the exact size as specified. Tirelessly, and with perfect reliability. Fragment size selection itself is achieved by the perforated screen substructure through which the material exits after the shredding process.

Precise shredding of large and solid materials. That’s what ERDWICH does.

Technical features of the ERDWICH three-shaft shredder
Rugged rotor blade cutting system with sweeper shaft
Individually fitted, replaceable cutter discs
Central, pivotable screen basket
Bulkhead seals to protect the shaft bearing
Mechanical and hydraulic drive systems available
PLC unit featuring automated reverse and power down

More Less

Product category: Foundry waste preparation plants

ERDWICH Two-Shaft Shredder

The high-volume, high-quantity swarf specialists!
Continuous-process shredding of large quantities and volumes: that’s the world of the ERDWICH two-shaft shredder. The secret of its success is our ERDWICH rotor-blade cutting principle, honed to perfection over decades. Want to know more?  
The material is taken up by the barbed blade, pulled unceremoniously into the machine and then shredded between the blades on the two opposing shafts. Whatever the material – e.g. special waste, WEEE, metal swarf, electrical waste or bulky items – even hard to shred, large-volume materials stand no chance against these two mighty cutter shafts. Perfect results are even guaranteed from fibrous, moist, heat-sensitive, elastic and rubbery materials. And, thanks to its mode of operation as a slow-speed piece of equipment, the ERDWICH two-shaft shredder also features quiet and largely dust-free operation.
You can rely on the power and the technology of the ERDWICH two-shaft shredder.

Technical features of the ERDWICH two-shaft shredder
Rugged rotor blade cutting system
Individually fitted, replaceable cutter discs
Range of cutter widths and cutter shapes
Bulkhead seals to protect the shaft bearing
Mechanical and hydraulic drive systems available
PLC unit featuring automated reverse and power down

More Less

Product category: Foundry waste preparation plants

ERDWICH Single-Shaft Shredder

The all-rounders for any application!
Achieving precision material breakdown in just a single operation: that’s the proven capability of the Erdwich single-shaft shredder.

How does it do it? 
The material is taken up by the cutting rotor and shredded repeatedly against the stator blade, using the tried-and-tested rotor/stator principle. This continues until the desired size has been achieved and the material can pass through the perforated screen underneath. The result is impressive: superior efficiency and optimum reliability for predefined fragment sizes. 
Choose the mature and highly economical technology of the ERDWICH single-shaft shredder for your application.

Technical features of the ERDWICH universal single-shaft shredder

Precise rotor/stator cutting system
Individually fitted, replaceable cutter discs
Integrated perforated disk to sort piece sizes  
Bulkhead seals to protect the shaft bearing
Application-specific drive and cutter element models
PLC unit featuring automated reverse and power down

More Less

Company news



06 Jun 2019

Saving time and space: Special pre-shredder reduces scrap in aluminium foundry to manageable sizes and optimises intralogistics process

Implementation of a sophisticated safety concept for the monitoring of container filling levels

In the light alloy foundry at the BMW Group's plant in Landshut, all scrap products such as punching waste and sprue systems are recycled and then remelted. For this purpose, the die-cast parts were previously collected in containers without being shredded and were removed from the basement of the foundry with considerable use of manpower. In the course of a renewal of the casting cells in the foundry hall, the work processes were optimised and more efficient processes set up. Erdwich Zerkleinerungs-Systeme GmbH was awarded the contract to design a plant that enabled the collection and shredding of the foundry's aluminium waste directly from the press. For this task, the recycling expert adapted the RM 1350 pre-shredder to the local conditions. On-site shredding means that the containers with scrap parts and punching waste have to be transported far less frequently to a large container, which contributes to a significant increase in operating efficiency. In cooperation with the technical department of the BMW Group, Erdwich also developed a sophisticated safety system for monitoring the condition of the machine.

The light alloy foundry at the BMW Group plant in Landshut is one of the most modern foundries in the world. Every year, around five million aluminium casting components, such as engine components or structural components for the vehicle body, are produced there using five different casting processes, with a total weight of 84,000 tons. As in all areas of the company, the aluminium foundry works with maximum efficiency in order to keep the scrap rate as low as possible. In the past, the regularly occurring scrap was collected in containers without being shredded, removed from the basement and then returned to the melting process. The cast aluminium parts had dimensions of up to 2,000 x 1,400 mm and therefore took up a lot of space in the collection containers. This, in turn, meant that the containers had to be emptied frequently, which required a great deal of time and manpower. In the course of reconstruction measures in the foundry hall, during which the casting cells were replaced one after the other, it was planned to optimise the recycling process.

New plant achieves significant increase in efficiency

Erdwich Zerkleinerungs-Systeme GmbH from Igling in Upper Bavaria, which has decades of experience in the construction of recycling plants, got the order to plan and commission the metal shredder. This was particularly beneficial for the project in Landshut, as Richard Adelwarth, project manager at Erdwich Zerkleinerungs-Systeme GmbH, reports: "When we visited the site, it quickly became clear that the solution required in the tender would not have the desired effect. We therefore carried out many trials and consulted another company in the industry, with whom we regularly work on larger projects in order to be able to offer an optimum solution.” Erdwich finally made a machine available with which a typical production process was executed.

The recycling experts designed a machine based on the RM 1350 pre-shredder. This machine is characterized by fast and easy maintenance, long service life, optimum shredding and high throughput. To date, seven systems with soundproof enclosures have been installed for the eight casting cells and punch presses in the plant. "Loading takes place in free fall, that means the moulds, which are to be returned to the melting process, now fall from the pressing plant directly into the hopper of the pre-shredder and then into a container measuring 1,400 x 1,400 x 900 mm," explains Adelwarth. When the container is full, it is transported outside, emptied into a large container; and this in turn is brought to the smelter. The shredding process has reduced the volume of cast parts by 50 to 60 percent, which means that the disposal containers have to be emptied far less frequently and thus require less time and manpower.

Sophisticated safety system developed together with BMW Group technicians

The pre-shredders were adapted to the special conditions prevailing on site. The drives of the machines, for example, had to be mounted on one side instead of the usual two. The reason for this was the columns of the building, which were located in the area of the installation site and therefore required a narrower design. In addition, the crushing tools themselves and their arrangement within the cutting chamber were adapted to the local conditions. Over and above this, the standard version of the RM 1350 already has a safety system. This includes a PLC control system with automatic reverse and cut-out control, so that the machine is protected from damage in the event of overload or bulky solid parts. In addition, each shaft is equipped with an energy-optimized frequency converter, which ensures that the two cutting gear shafts are driven separately. This enables optimum adaptation to the shredding process. Together with the technical department of the BMW Group, the safety system was extended by new features. "Both the filling level of the removal box located in the basement and the monitoring of the shredder itself are now displayed transparently, so that a quick response can be made if necessary," explains Adelwarth.

Further optimisation potential available

As soon as all casting cells have been replaced, a conveyor belt system could be installed in a further expansion stage in order to further optimize the disposal process. Thereby, the shredded rejects would no longer to be collected in containers that have to be removed and emptied by hand - instead, the rejects would be transported directly into the large container via a conveyor belt. In this way, scrap products and punching waste from all casting cells can be disposed of simultaneously and without additional logistical effort. For the current expansion stage, all necessary alterations were quickly implemented so that Erdwich was able to meet the requirements placed on the machines. As a result, the work processes were considerably accelerated.

More Less

06 Jun 2019

Metal recycling: Shredding of large parts enables cost reductions through prompt remelting

For the most efficient use of raw materials in the production process, the processing of reject materials and by-products of the foundry and machining industries is increasingly gaining in importance. The goal is the fastest possible recycling of the metal in the production process, thus avoiding the high costs involved in temporary storage and keeping the space required to a minimum. However, before the cast elements, swarf and metal shavings can be remelted, they must be reduced in size to ensure optimum melting. The recycling experts at ERDWICH Zerkleinerungs-Systeme GmbH are presenting two solutions from their portfolio at this year's GIFA in Düsseldorf, namely the RM1350/2 twin-shaft ripper and the M600/1 single-shaft shredder, with which this pretreatment can be carried out.

In aluminium foundries in particular, large quantities of punching waste, flashings or defective castings are created in the daily production, which are then collected, recycled and melted down again. Especially in view of rising commodity prices, it is in the interest of companies that the return of waste material to the production process takes place as quickly and efficiently as possible. Since many parts are bulky and unwieldy, they must be broken down before remelting.

The machine for the rough stuff

With the coarse shredder RM1350/2, ERDWICH Zerkleinerungs-Systeme GmbH offers the ideal machine for this task. Depending on the application, the length of the cutting gear varies from 1,500 to 2,500 mm. The width is 1,350 mm but can also be customized. The knives of the cutting gear made of wear-resistant special steel are individually inserted, so that different sequences of types of cut are possible depending on the material to be shredded. The cutting tools are easily accessible and can be exchanged individually if required or be installed so as to be welded directly into place. Depending on the field of application, drives of various capacities, from 45 kW to 132 kW, are available. The two motors of the twin-shaft rotor shredder system from ERDWICH are each equipped with an energy-efficient frequency converter so that the shafts can be controlled independently of each other. In addition to the high-performance electromechanical transmissions, the throughput capacity is enhanced by the possibility of alternately driving the shafts both forward and reverse. The PLC control with reversing and automatic switch-off protection, specially designed for this purpose, protects the machine against damage caused by overloading or bulky solid parts that have become jammed. Using the RM1350/2, for example, the volume of castings can be reduced by 50 to 60 per cent.

M600/1 for finer material processing

ERDWICH presents the M600/1 for the finer shredding of smaller castings and metal swarf. The single-shaft shredder is particularly suitable for precise shredding in a single process, since the material is gathered using the proven rotor-stator cutting principle, delivering it to the cutting rotor where it is reduced by the stator knife until it has reached the desired size. This can be discharged through the sieve integrated below it, enabling the precise definition of the grading of the materials thus reduced. Here also, the M600/1 has fully hardened blades, which can be reground several times, ensuring a long service life.
The single shaft shredder is available with two different sizes of cutting gear of 400 x 500 mm or 600 x 500 mm (LxW) and with a drive power of between 5.5 and 9.2 kW. In addition, there are further models with other shaft lengths.

The M600/1 and the cutting gear of the RM1350/2 will be presented by ERDWICH at this year's GIFA in Düsseldorf. Managing Director Harald Erdwich and his colleagues are available for initial discussions and specific inquiries in Hall 16, Booth 16E25.

More Less

About us

Company portrait

Innovation comes as standard!
As a highly-specialised engineering and manufacturing company, ERDWICH can draw on over 40 years of experience to offer superior services in recycling and shredder technology.

Shredders, custom solutions, turnkey recycling facilities and a global service form our core competencies, all supported on a day-to-day basis by our passionate and committed team.

More than 7.000 machines in over 91 countries throughout the world are the calling card for our unique and successful corporate philosophy, which places our customers and their needs at the centre of our decisions and actions – with no ifs or buts.

For us, innovation is our daily benchmark, not least because our long-serving, experienced employees work with our customers to create the perfect, customer-specific solution for each and every application.

Whether you’re looking to process metal swarf, refrigeration units, electronic scrap, printed circuit boards, cardboard, plastics, special or bulky waste – we have the solution you need.

And ERDWICH is also your professional partner if you want to completely rethink your approach. After all, our Test Centre puts us in a position to hone your requirements to perfection under real-world conditions and create the environment required for convincingly implementing every last detail of your investment project.

Owner-managed, with personal, dedicated support, short response times and a comprehensive service portfolio, we give you first-class quality, "Made in Bavaria". Get to know us. Find out more at

Company data

Export content max. 75%
Number of employees 20-49
Foundation 1972

Company information as a PDF file