Manage stand orders
Select Option

JML Industrie SA

6, rue J.J. Rousseau, 08330 Vrigne aux Bois
France
Telephone +33 324 521397
Fax +33 324 522016
jml@jml-industrie.com

Hall map

GIFA 2019 hall map (Hall 15): stand H14

Fairground map

GIFA 2019 fairground map: Hall 15

Contact

Jean-François Bouveur

Directeur Commercial

Phone
0646580642

Email
Jf.bouveur@jml-industrie.com

Andrea Marcheluzzo

Responsabile di filiale

Phone
+39 059 7147719

Email
a.marcheluzzo@jml-industrie.com

Gilbert Saloff

Geschäftsführer bei JML ViCon GmbH

Phone
+49(0)170 22 49 757

Email
g.saloff@jml-industrie.com

Our range of products

Product categories

  • 01  Foundry plants and installations, planning, construction, engineering

Foundry plants and installations, planning, construction, engineering

  • 05  Moulding and core making
  • 05.01  Moulding machines and plants for bentonite-bonded sands
  • 05.01.02  Moulding plants, flaskless

Moulding plants, flaskless

  • 05  Moulding and core making
  • 05.03  Core making machines and plants
  • 05.03.01  Core blowing and shooting machines and plants

Core blowing and shooting machines and plants

  • 05  Moulding and core making
  • 05.04  Moulding and core making machines, accessories
  • 05.04.01  Gassing equipment for moulds and cores

Gassing equipment for moulds and cores

  • 05  Moulding and core making
  • 05.04  Moulding and core making machines, accessories
  • 05.04.04  Core handling equipment

Core handling equipment

  • 05  Moulding and core making
  • 05.04  Moulding and core making machines, accessories
  • 05.04.07  Coating preparation

Coating preparation

  • 07  Moulding sand preparation and sand reclamation
  • 07.01  Moulding sand preparation
  • 07.01.01  Moulding sand preparation machines and plants

Moulding sand preparation machines and plants

  • 07  Moulding sand preparation and sand reclamation
  • 07.01  Moulding sand preparation
  • 07.01.06  Sand coolers
  • 07  Moulding sand preparation and sand reclamation
  • 07.01  Moulding sand preparation
  • 07.01.07  Sand aerators
  • 07  Moulding sand preparation and sand reclamation
  • 07.02  Sand reclamation, plants and machines
  • 07.02.01  Sand reclamation of clay bonded moulding sands

Sand reclamation of clay bonded moulding sands

  • 07  Moulding sand preparation and sand reclamation
  • 07.02  Sand reclamation, plants and machines
  • 07.02.03  Sand reclamation of synthetic resin bonded sands

Sand reclamation of synthetic resin bonded sands

  • 11  Knock-out, fettling and finishing
  • 11.01  Knock-out
  • 11.01.01  Knock-out and cooling drums and conduits

Knock-out and cooling drums and conduits

  • 11  Knock-out, fettling and finishing
  • 11.01  Knock-out
  • 11.01.02  Knock-out machines

Knock-out machines

  • 11  Knock-out, fettling and finishing
  • 11.01  Knock-out
  • 11.01.03  Cooling conveyors

Cooling conveyors

  • 15  Transportation and storage
  • 15.03  Pneumatic conveyors

Pneumatic conveyors

  • 15  Transportation and storage
  • 15.05  Oscillating conveyors

Oscillating conveyors

  • 15  Transportation and storage
  • 15.06  Continuous conveyors (belt conveyors, bucket conveyors and others)

Continuous conveyors (belt conveyors, bucket conveyors and others)

  • 15  Transportation and storage
  • 15.07  Bunkers, silos and accessories

Bunkers, silos and accessories

  • 21  Exhaust and ventilation technology
  • 21.03  Ventilating and air-conditioning equipment

Ventilating and air-conditioning equipment

Our products

Product category: Sand coolers

Sand preparation for green sand

The preparation of green sand begins under the shake out machine after the separation of the casting sand and the sand is fed to the forming machines at the end of the process.

We offer a wide range of systems for cleaning, cooling, transporting, storing and distributing sand. JML also integrates methods for recycling filter dust containing clay and black minerals.

More Less

Product category: Sand coolers

Sand preparation for core sand

When it comes to the sand preparation for core sand, JML has a wide range of equipment for transporting, storing and metering sand, resins and additives, including the homogenisation and distribution of prepared sand to feed it to the forming plant or core shooters.

We also integrate equipment for sand regeneration, such as lump crushers or regenerative furnaces.

More Less

Product category: Sand aerators

Shake-out machines VAO

  • Length: = 6.000 mm
  • Width: = 1.400 mm
  • Capacity: = 100 t/h sand, 20 t/h castings/h
  • Maximum Weight of Castings = 250 kg
  • Temperature of castings = 650 °C
  • Temperature of sand = 120 - 350 °C

More Less

Company news

Date

Topic

Download

May 7, 2019

We go green and look at how foundry technology is changing

Compared to other industries, the foundry industry has always faced significant challenges in developing environmentally friendly processes and machinery. It is well known that foundries face a particular challenge; substantial energy needs generally satisfied by burning fossil fuels. This has always made it unlikely that the industry would spearhead green innovations!

A second challenge within the industry has been the size of foundries globally. Traditionally the foundry industry has been made up from small foundries with unique processes and product combinations. This limited the development of machines and processes which could benefit the entire industry. Further combined with the small margins typically associated with casting, this has reduced the capacity for significant investment in major process changes.

Regulation creates a final challenge for the development of new foundry technologies. Traditional processes such as casting shakeout and the use of melting furnaces are often subject to rigorous regulation, so changes often engage lengthy permitting procedures. This has meant smaller foundries unable to invest in new equipment continue to emit the same levels of CO2 and SO2 .

Technology as a driving force

Industry 4.0 brings significant developments in foundry machinery. The industry has woken up to the importance, and the financial impact, of being more environmentally friendly. We need only look at the EcoMetals tour at GIFA to see the changing attitudes.

The three main processes which drive energy consumption and pollution across foundries are generally:

  • Mold preparation
  • Melting raw materials
  • Casting and shakeout
  • Energy efficiency
The U.S. Energy Information Administration Environment identifies the generation of electricity as the top source of foundry greenhouse gas emissions. Foundries who focus on a reduction in their energy consumption not only impact on the environment but also will positively affect their bottom line.

Research by the Industrial and Manufacturing Engineering Department at Pennsylvania State University found that when energy reduction strategies were used in conjunction with waste reduction techniques significant cost improvements were found. They recommend using a Green Value Stream Map to highlight key areas to review performance. Regardless of the methodology you choose the results are clear; the less you consume the lower your energy overheads will be.

Waste reduction

Technology also plays an important role in helping foundries reduce their waste output. The type of waste that foundries produce depends on their output and the foundry industry is so vast that we don’t have the word count to list all waste. When we take the classic example of sand, which is commonly reused and recycled, we know that a foundry can significantly reduce their overall waste. Many routinely recycle green sand. But, it still has an “end life” as it becomes too fine for reuse. Machines developed to wear sand less increase the life of the sand.

One of the innovative machines JML Industrie will be presenting at GIFA 2019 significantly reduces the wear of the sand, as there are no mechanical parts in contact. Not only can the sand be reused more frequently but the equipment parts also see a significant reduction in wear, increasing the lifespan of the machine.

For the non-ferrous and steel foundries the presence of lead, zinc and cadmium generates harmful waste. A report by Ijsee estimated that molding and core sand make up 66% to 88% of total waste from ferrous foundries.

Chemically bound sand used for cores and shell molds is more difficult to reuse and can become waste after a single use. When additional materials are identified in sands after use treatment may be required prior to disposal. Equipment and processes that reduce toxicity improves the negative impact on the environment as well as disposal costs.

The industry as a whole is working to reduce the amount of waste generated. This includes recycling initiatives and policies to reduce toxicity. On advanced sand mixers, it is possible to reduce waste and improve overall quality by delivering the exact sand recipe and quantity along with a fully automatic filling sequence.

Pollution reduction

The net result of more efficiently managing waste and controlling energy consumption is that foundries are becoming more environmentally friendly. Internal programs and policies help to conserve energy, reduce waste and enhance efficiency. Adoption of ‘right-first time’ production has a significant impact on the above.

Reduction of waste and quality improvements

Reviewing the advancements in environmentally friendly technologies it is clear these improvements also drive higher quality output for foundries. Focusing on quality, and getting production right first time, automatically reduces waste and energy consumption. This is both positive for the environment and for production overheads.

As the industry develops we will continue to see innovations that reduce environmental impact. Industry 4.0 is starting to gain traction, especially in Germany and as technology drives further improvements in efficiency and output, we will continue to see a reduction in the industry’s environmental footprint.

JML Industrie’s commitment to the environment

Recently JML Industrie launched a range of environmentally friendly equipment. A new logo has been designed to help customers recognise that the equipment is a step towards greener foundry production.

We recognise that the industry is changing as a whole and we want to enable our clients to stay ahead of these changes.

More Less

Apr 10, 2019

We celebrate our 40-year anniversary

With over 80 employees across Europe, we have grown considerably since 1979. We take a look how we have changed and our future plans.

A lot can change in 40 years! In 1979, Jean-Michel Lavoisier (JML) created the company in Vrigne-Aux-Bois, which was at the heart of the French metallurgical industry. Originally JML started by producing trailers but we quickly developed foundry equipment manufacturing in 1981.

We saw steady growth during the first 15 years. By 1995 our capacity had doubled within the engineering team. We are also proud to say that we were early adopters of the SolidWorks 3D software, which we still use today.

2018 was an important year for JML with the expansion of our covered work area to over 10,000m2 as well as the opening of JML Italy.

Obviously, none of this development and growth would have been possible without the JML team. We want to take this opportunity to thank all of our collaborators; you have been a fundamental part of our expansion.

So how will 2019 surpass last year’s achievements?

GIFA 2019 marks a key milestone for JML Industrie. This year we will showcase our largest ever stand (150m2) where we will present machines from each of our branches.

We hope that many of our clients and future clients will come and visit us at GIFA this year (15H14). On the first day of the event we will be revealing, in a dramatic fashion, our latest innovation from our Italian team. We believe our newest machine will set JML Industrie apart from the competition and offer our clients an interesting alternative to traditional foundry equipment.

More Less

About us

Company details

Global manufacturer and supplier of industrial foundry equipment

More Less

Company data

Number of employees

50-99

Company information as a PDF file