Lanner Anlagenbau GmbH

Kehnerfeld 9-11, 77971 Kippenheim
Germany
Telephone +49 7825 8454-0
Fax +49 7825 8454-50
info@lanner.de

This company is main exhibitor of

Hall map

GIFA 2019 hall map (Hall 15): stand E02

Fairground map

GIFA 2019 fairground map: Hall 15

Our range of products

Product categories

  • 01  Foundry plants and installations, planning, construction, engineering

Foundry plants and installations, planning, construction, engineering

  • 22  Environmental protection and waste removal
  • 22.06  Foundry waste preparation plants

Foundry waste preparation plants

  • 22  Environmental protection and waste removal
  • 22.07  Pelletization plants

Pelletization plants

  • 22  Environmental protection and waste removal
  • 22.08  Residue recycling
  • 22  Environmental protection and waste removal
  • 22.11  Environmental protection and waste removal, further installations

Environmental protection and waste removal, further installations

Our products

Product category: Residue recycling

Complete system

A cart with chips containing coolant enter the chip processing system e. g. via fork lift or chip cart dumper. Depending on their shape chips have to be resized by a chip crusher. A conveyor transports the free-flowing chips to the centrifuge, if tramp metals are occurring a screener is necessary. The parabolic or lifting bottom centrifuge separates the coolant from the chips. These dry chips can be conveyed into e. g. a briquetting press, several containers or directly into a melting furnace. The separated coolant is collected in a tank and can be reused.

The entire system is controlled by a central control cabinet. Depending on the requirements concerning e. g. Industrie 4.0 the system can be expanded with additional components, such as automatic feeding via an automatic guided vehicle (AGV) or remote access.

More Less

Product category: Residue recycling

Vetamat system

The patented Vetamat system separates the metal chips or grinding sludge reliably from the coolant.

A cart with chips containing coolant enter the chip processing system e. g. via fork lift or chip cart dumper. Depending on their shape chips have to be resized by a chip crusher. A conveyor transports the free-flowing chips to the centrifuge. The parabolic or lifting bottom centrifuge separates the coolant from the chips. The coolant is collected in a tank and can be reused. The entire system is controlled by a central control cabinet.

With the add-on system the Vetamat can optionally be expanded with a chip crusher, tramp metal separator, chip cart dumper, material separation as well as coolant treatment.

More Less

Product category: Pelletization plants

DS centrifuge

In the fully automatic operation the wet chips or the sludge fall through the infeed hopper into the drum of the lifting bottom centrifuge. At this point the chips meet the rotating lifting bottom and are pressed against the drum wall under high centrifugal forces. The hydraulically activated lifting bottom moves the chips and/or the sludge upwards to the slot sieve where the liquids are separated from the chips.

After a few lifting cycles the centrifuged chips are carried over the edge of the drum and quit the centrifuge into the chip cart or discharge conveyor. The centrifuged coolant can be returned to the production or pumped back to further treatment.

More Less

About us

Company data

Number of employees

20-49

Foundation

1987

Area of business
  • Transportation and storage
  • Environmental protection and waste removal