During many industrial processes, the normal ambient temperature has a disturbing effect. The oxygen content of the air causes such unwanted side-effects and thus severe damages of the material surfaces. Inert gases are so-called artificial atmospheres, which protect the matal against disturbing influences during the production processes.
In order to produce high quality Endogas, it is very important, that the quality of the combustible gas is always the same. The supply of air and combustible gas is the same as for the production of Exogas. Air and combustible gas will be mixed in the retort inlet in a certain percentage and controlled by a flame non return safety device. The retort is filled with catalyst in order to speed up the reaction. After the gas has left the retort it will be cooled down and transported to the final use.
During many industrial processes, the normal ambient temperature has a disturbing effect. The oxygen content of the air causes such unwanted side-effects and thus severe damages of the material surfaces. Inert gases are so-called artificial atmospheres, which protect the matal against disturbing influences during the production processes.
Air and natural gas will be injected into the combustion chamber with a pressure of 200 mbar. Inside the combustion chamber the exothermic reaction between natural gas and air takes place. The combustion chamber, gladed with high temperature resistent ceramic material, has a double wall chamber and will be cooled with water. Modern generators produced by FK Industrieofenbau + Schutzgastechnik GmbH can produce Exogas with a content of O2 less than 5 vpm. The H2 content will be automaticall adjusted between 1 - 10 vol%.
During many industrial processes, the normal ambient temperature has a disturbing effect. The oxygen content of the air causes such unwanted side-effects and thus severe damages of the material surfaces. Inert gases are so-called artificial atmospheres, which protect the matal against disturbing influences during the production processes.
Originated from the greek word „monos“ (alone) the nomination „Monogas“ has been adapted, because in general only one gas exists (N2 ) in this gas. Monogas will be produced in such a way, that Exogas will receive further cleaning, i.e. carbon dioxide (CO2 ) and (H2O) will be removed.
FK Industrieofenbau + Schutzgastechnik GmbH is using the Molekularsieve-method. The advantage using the absorbtion method is the possibility to remove carbon dioxide (CO2) and water vapour in one process.