IRAN FERROSILICE CO.
Unit 1903-19th Floor, No.23, Park Center, Building, 8th Narenjestan, Pasdaran Ave,
1957614067
Tehran
Iran, Islamic Republic
Iran, Islamic Republic
This company is co-exhibitor of
Iran Ferroalloy Industries Co.
Location
Hall map
Fairground map
Our range of products
Product categories
- 04 Metallic charge materials
- 04.01 Charge materials for iron, steel and malleable iron casting
- 04.01.03 Ferro-alloys
Ferro-alloys
Our products
Product category: Ferro-alloys
Ferrosilicon (FeSi )
It is the main product of the Iran Ferrocilice Co. In physical and solid format , it is silver. The melting temperature is 1290-1390° C. Its specific weight 2.5-5.4 g/m3. It is used as additive in the cast and steel industries.
It is shattered and non-flammable .There is no self – immolation and transportation should be carried out on the basis of the rules of chemical handling. The dust of this material creates a burning for the lungs and the mucus. Contact with skin and eye will cause an itchy scalp. Using protective glasses and masks and most importantly protective mask based on EN 149 FFP and appropriate ventilation is required at the workplace. In case of contact skin and eye washing with plenty of water is required and in the face of inhaling problem, transfer injured one to the open air.
It is shattered and non-flammable .There is no self – immolation and transportation should be carried out on the basis of the rules of chemical handling. The dust of this material creates a burning for the lungs and the mucus. Contact with skin and eye will cause an itchy scalp. Using protective glasses and masks and most importantly protective mask based on EN 149 FFP and appropriate ventilation is required at the workplace. In case of contact skin and eye washing with plenty of water is required and in the face of inhaling problem, transfer injured one to the open air.
Product category: Ferro-alloys
Ferrisilicon Magnesium ( FeSi Mg)
This material is one of the products of Iran Ferrosilice Co.. FeSi Mg is hollow and grained, silver gray with a metal surface and melting temperature of 1300 ° C. FeSi Mg is used in the casting industry to produce unbreakable castings and in the steel industry for the treatment of steels. The production capacity of this product is 6000 tons annually,
Which is produced in different types according to the customers request .
It is an extinguishing agent and, when exposed to moisture or acid and grease, leads to extremely hazardous gases. Breathing this dust and gas for lungs and mucous membranes creates a burning sensation.
Which is produced in different types according to the customers request .
It is an extinguishing agent and, when exposed to moisture or acid and grease, leads to extremely hazardous gases. Breathing this dust and gas for lungs and mucous membranes creates a burning sensation.
Product category: Ferro-alloys
Microsilica powder (silica fume)
It is a subsidiary of Ferrosilicon production, which is an ultra-thin (breathable dust) glass powder with a melting temperature of about 1550 degrees Celsius. This product is not described as a hazard to the environment, it is not an extinguishing agent, and when in contact with the body, there are risks such as itching and dryness of the eyes, irritation of the skin, and burning and dryness of the human membrane. Rinse it with plenty of saline solution and consult an ophthalmic clinician to remove skin damage. In the event that the injured person breathes the mist, the person is transferred to the open air. Personal protection when exposed to dust is the use of protective gloves and glasses and the most important factor in using a special protective mask.
About us
Company details
Iran Ferrosilice Co. is one of the most important producers of Ferrosilicon in the Middle East. The companies products complying with national and international standards in addition to supplying domestic needs, exporting this product to different countries of the world, which in the year 1396 became the title of superior exporter of the country.
In order to increase productivity, attract and increase customer satisfaction, protect the environment and promote the level of safety and health of the employees and all those involved with the company, the establishment of quality management system, environmental management system and occupational safety and health management system Based on ISO9001: 2015 and ISO 14001: 2015 and OHSAS18001: 2007 standards in the form of an integrated management system. (IMS)
In order to increase productivity, attract and increase customer satisfaction, protect the environment and promote the level of safety and health of the employees and all those involved with the company, the establishment of quality management system, environmental management system and occupational safety and health management system Based on ISO9001: 2015 and ISO 14001: 2015 and OHSAS18001: 2007 standards in the form of an integrated management system. (IMS)