Manage stand orders
Select Option

E-therm TZ s.r.o.

K Letisti 908, 33901 Klatovy
Czechia
Telephone +420 378 603252
Fax +420 378 603270

Hall map

THERMPROCESS 2019 hall map (Hall 10): stand A05

Fairground map

THERMPROCESS 2019 fairground map: Hall 10

Our range of products

Product categories

  • 01  Industrial Furnaces, Industrial Heat Treatment Plants and thermal processes for
  • 01.08  Steel and Iron
  • 01.08.03  Heat treating
  • 01.08.03.01  Heating

Our products

Product category: Heating

Car bottom forging furnaces

Besides their chamber counterparts, car bottom preheating furnaces are most frequently used to heat up ingots and semi-finished items in forges. Temperatures up to 1,350 °C can be achieved in their working spaces. Their advantage is easy access for loading and emptying the contents, the possibility to use an over-head crane in the hall and independence of any other handling equipment.

More Less

Product category: Heating

Car Bottom Heat Treatment Furnaces

Car bottom annealing furnaces are used within the heat treatment of ready-made products in forging and pressing shops, as well as for the heat treatment of castings and weldments. Bulky parts are annealed while resting on annealing supports mounted on the furnace car, while smaller ones are loaded as stored in baskets or on grates. These furnaces are used for many various types of heat treatment – normalization, process annealing, heating for hardening or austenization, further for tempering or for annealing to release internal stresses after molding or welding. Commensurate to the above is the range of operating temperatures, from 250 °C to 1,150 °C, exceptionally up to 1,250 °C in the event of special materials. Where required, furnaces are fitted with a cooling system that will make it possible to carry out heat processing as a whole process, including controlled cooling zones and intense final cooling of the charge in the closed furnace without the need to open the door or to move the car out of furnace.

More Less

Product category: Heating

Chamber Forging Furnaces

Steel preheating chamber furnaces are used to preheat steel parts in forges that process medium-weight and small forgings. Typical operating temperatures are up to 1,300 °C; the capacity of the largest furnaces ever supplied is 80 tonnes (charge weight) with hearths sized 5.6×6.5 m and heating speeds normally up to 100°C per hour. Unlike car bottom furnaces, their chamber counterparts need charge handling (loading/unloading) equipment.

More Less

About us

Company details

E-therm TZ s.r.o. (Ltd) is a Czech-registered engineering and supplier company active in the field of industrial furnaces and other thermal equipment intended mainly for the steel processing and mechanical engineering industry.

More Less