18.11.2026
Reading Time - 9 min.

Gigacasting and Megacasting: Where Does the Die Casting Industry Stand?

Industry Trends, Market Developments and Future Prospects
Thomas Fritsch

Teaser

Industry Trends, Market Developments and Future Prospects

The Gigacasting Wave

Luca Greco
Luca Greco

Few developments have had such a significant impact on the die casting industry in recent years as giga- and megacasting. The introduction of increasingly powerful machines, more ambitious structural components and the prospect of replacing dozens or even hundreds of individual body parts with a single casting have brought die casting into the spotlight well beyond the foundry sector.

But what is the current state of this technology? Is gigacasting still on a growth trajectory, or has too much capacity already been created, particularly in China? And could Europe and North America unexpectedly become the main drivers of growth in the years ahead?

Luca Greco has followed the development of large-format structural die casting since Chinese manufacturers began adopting the process after Tesla. His conclusion is straightforward: the gigacasting trend is far from over, although it has evolved into two distinctly different developments.

Gigacasting Moves from Concept to Industrial Application

Whether referred to as gigacasting, megacasting, hypercasting or unicasting, the underlying principle remains largely the same: a vehicle body structure that previously required dozens or even hundreds of individually stamped components is replaced by one large aluminium casting.

The most common applications are rear underbody structures and, from a technical perspective, the more demanding front underbody.

However, the number of announced projects still differs considerably from actual industrial implementation. By mid-2026, only approximately six out of every ten machines announced worldwide had been installed in factories. Around two-thirds of these installed machines are located in mainland China.

This demonstrates that the development of gigacasting follows very different patterns across individual markets.

China: Investment in Capacity Has Outpaced Demand

The Chinese market presents a number of unexpected characteristics. Supplier foundries account for approximately 70 percent of the order book, rather than automotive manufacturers themselves.

One might have assumed that OEMs would lead investment, particularly emerging electric vehicle manufacturers hoping to become the next Tesla. Instead, dozens of suppliers placed orders for large die casting machines and, in some cases, installed them – occasionally for vehicle programmes that were never realised.

This investment surge was not entirely without strategic reasoning. Announcing the purchase of a large die casting machine could help suppliers gain access to OEM purchasing lists. Meanwhile, numerous foundries were competing for a relatively small number of major structural casting programmes.

Consequently, many companies committed to purchasing machines first, anticipating that the corresponding business would follow.

A closer examination of today's successful installations reveals an interesting pattern. The machines with the highest utilisation rates are primarily situated within vehicle manufacturing plants or directly next to the facilities they supply.

Chinese OEMs have installed most of the machines they ordered. Supplier foundries, on the other hand, have installed only around half of theirs.

The situation becomes even more apparent when looking at actual capacity utilisation. China's installed machine fleet could theoretically manufacture several times more structural castings than the market currently requires. Across the entire fleet, utilisation amounts to only around 20 percent of theoretical capacity. While a limited number of cells achieve high output for major vehicle programmes, approximately one-third of installed machines currently have no corresponding components to produce.

China has thus established the world's largest gigacasting machine fleet, but is using only a small share of its available production capacity.

Markets Outside China Face a Different Situation

In Europe, North America, Japan and Korea, the market picture is almost the reverse.

Today, it is difficult to identify a major automotive manufacturer in these regions that is not pursuing gigacasting projects. Nevertheless, only a limited number of OEMs have fully implemented their announced programmes.

Many manufacturers still have machines awaiting installation. Their commissioning has frequently been postponed alongside the new electric vehicle platforms for which they were initially planned.

Several major vehicle programmes were cancelled or delayed during 2025 and 2026. However, one particularly interesting observation is that, in the cases I have monitored, the casting technology often remained part of the plans even when other elements of the original vehicle platform were abandoned.

Gigacasting projects may be running behind schedule, but they are not disappearing.

An important reason is that the technology is especially suitable for completely new vehicle architectures. Attempts to integrate gigacasting into existing combustion-engine platforms have so far produced unconvincing results, both economically and in terms of the final product.

Why the Biggest Machines Are Not Necessarily the Best Solution

Among the most eye-catching announcements in recent years have been plans involving 16,000- and even 20,000-ton die casting machines, accompanied by the vision of manufacturing an entire vehicle underbody in a single shot.

The reality of industrial production is much more pragmatic.

More than 90 percent of China's machine fleet, including both ordered and installed equipment, belongs to the 6,000- to 10,000-ton category. These machines are mainly used to manufacture front and rear underbody structures and, considerably less frequently, battery trays.

The number of installed machines exceeding 10,000 tons is very limited. Many of the announced ultra-large machines have since been cancelled, put on hold or never constructed.

Producing an entire underbody as one single casting has also proven technically extremely demanding and economically challenging, even in cases where attempts have been made to industrialise the process.

The same is true of dual injection. The concept of filling a large casting simultaneously from two directions to substantially shorten the metal flow distance attracted considerable attention at trade fairs. However, it has not yet established itself in series production.

This leads to an important observation:

Gigacasting is not about competing to build the biggest machine or manufacture the largest possible component. Its real purpose is to replace as many individual parts as possible while maintaining the most efficient production process.

Magnesium as a Potential Next Development

Magnesium is among the most interesting materials that could shape the next stage of development.

When used for structural castings, it can achieve weight savings of approximately 20 percent compared with aluminium. In China, five leading OEMs have already manufactured magnesium gigacastings. However, none has yet introduced such components into mass production.

Several challenges remain, including joining technologies, component corrosion, oxidation during casting and the application of high-performance alloys that may rely on rare earth elements.

My assessment is that magnesium will become part of the picture, but its industrial adoption will take longer than many earlier announcements indicated.

Future Expansion May Shift Towards Western Markets

Perhaps the most unexpected aspect of the current market situation concerns where the next major wave of growth will take place.

The common assumption is that China will continue to dominate gigacasting throughout the coming decade. After all, the country is already home to many new energy vehicle manufacturers, machine builders and highly capable foundries.

However, the available figures suggest a different scenario.

China has already established a substantial share of the capacity it requires. Even if demand for gigacast structural components nearly triples by 2030, overall utilisation would still remain below 50 percent when additional planned installations are taken into account.

The situation could be described as follows:

A successful increase in demand constrained by an overcapacity problem.

For Chinese supplier foundries, the next stage is therefore likely to involve consolidation rather than another major expansion. New OEM programmes can make use of existing, underutilised production capacity instead of automatically requiring additional large die casting machines.

For Chinese machine manufacturers, meanwhile, international export markets are expected to gain importance.

Europe and North America Have Considerable Room to Grow

By comparison, Europe and North America are still in the process of expanding their production capacities.

A considerable number of machines ordered by Western OEMs have yet to be installed. In addition, the next generation of dedicated electric vehicle platforms still requires financing and industrialisation in certain cases.

Another development could further influence the market: Chinese automotive manufacturers are increasingly establishing local production facilities in Europe. This may also lead to the introduction of some of their casting-intensive vehicle architectures at European manufacturing sites.

Under my base-case scenario, the number of gigacasting machines operated in-house by OEMs outside China could triple by the middle of the next decade.

China's installed machine fleet, in contrast, would barely need to increase over the same period.

The real surprise, therefore, may not be the continued expansion of gigacasting itself. Rather, it could be the fact that Europe and North America record faster growth than China in the installation of new large-format die casting capacity.

What Lies Ahead for the Foundry Sector?

For the foundry industry, the central question is no longer whether gigacasting works.

That has already been demonstrated.

The technology delivers results with established machine sizes, newly developed vehicle platforms and sufficiently large production volumes.

The more relevant question now is:

How can the foundry industry's expertise and capabilities contribute to an increasingly OEM-driven gigacasting infrastructure?

Large-format structural die casting is transforming far more than individual components and machines. It is influencing entire value chains, investment and location decisions, business models and the distribution of responsibilities among OEMs, foundries, machine manufacturers, toolmakers, alloy producers and other technology partners.

This could well mark the beginning of the most interesting chapter in the development of gigacasting.

About Luca Greco

Luca Greco founded The Gigacasting Newsletter and monitors the global development of large-format structural die casting, focusing on individual machine orders and installations.

At Industry Arsenal, he manages The Gigacasting Database, which consistently differentiates between announced projects, machines on order and equipment that has actually been installed. The database also includes analyses of the Chinese market and forecasts for Europe, North America, Japan and Korea.